Epson Equity Ie Ürün Destek Bülteni - Sayfa 15

Masaüstü Epson Equity Ie için çevrimiçi göz atın veya pdf Ürün Destek Bülteni indirin. Epson Equity Ie 19 sayfaları. Product support bulletin(s)
Ayrıca Epson Equity Ie için: Ürün Destek Bülteni (33 sayfalar), Ürün Bilgi Kılavuzu (7 sayfalar), Ürün Destek Bülteni (45 sayfalar), Ürün Destek Bülteni (21 sayfalar)

The next step after completing the low level format is to run the Novell COMPSURF

utility. When setting up the COMPSURF Parameters it will ask if you want to "Format

the drive?" where you will choose the "NO" response and proceed to the next option.

When asked if you want to "Retain the Bad Track Table" answer 'YES" and continue

on with the rest of the COMPSURF options. After completion of the COMPSURF

utility, continue on with the rest of the NETGEN installation.

The use of high capacity SCSI drives is another area where we are able to provide a

solution for those customers who require storage capacities greater than the Epson

Supplied options. When using a SCSI type hard disk drive, the hard disk controller

usually is a part of the hard drive unit. The connection between the SCSI bus and the

Equity's data bus is made by installing a host adaptor into the Equity computer and

connecting the SCSI drive to the host adaptor. The Seagate ST-296N, 85Mb drive,

used in a stand alone configuration in the current Equity Series computers has

provided favorable results.

When using SCSI drives in a Novell network, the use of the Future Domain SCSI

adaptor with high capacity SCSI drives such as CDC and Maxtor has also been very

successful. Future Domain recommends using Version 1.4 of their device driver

when installing Novell Netware Versions 2.1-2.15. When used with the TMC-830 (use

ROM Vers. 4.0L) or the TMC-840 (use ROM Vers. 5.0C) host adapters, drive sizes of

up to 800Mb (CDC 94181-702) can be accommodated.

PSB No: S-0091A

Page: 2 of 2