Motorola MBP27T/4 Kullanıcı Kılavuzu - Sayfa 21

Bebek Monitörü Motorola MBP27T/4 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Motorola MBP27T/4 36 sayfaları. Baby monitor with touchless thermometer
Ayrıca Motorola MBP27T/4 için: Hızlı Başlangıç Kılavuzu (2 sayfalar), Kullanıcı Kılavuzu (31 sayfalar), Kullanıcı Kılavuzu (36 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar)

Interference

Noise interference on your Parent Unit

• Your Baby and Parent Unit may be too close. Move them farther apart.

• Make sure there is at least 1 to 1.5 metres (3 to 4.5 feet) between the 2 units to

avoid audio feedback.

• lf the Baby Unit is too far away it may be out of range, try moving the Baby

Unit closer to the Parent Unit.

• Make sure the Baby and Parent Unit are not near other electrical equipment,

such as a television, computer or cordless/mobile telephone.

• Use of other 2.4 GHz products, such as wireless networks (Wi-Fi

Bluetooth

systems, or microwave ovens, may cause interference with this

product, so keep the Baby Monitor away at least 1 to 1.5 metres (3 to 4.5 feet)

away from these types of products, or turn them off if they appear to be

causing interference.

• If the signal is weak, try moving the Parent and/or Baby Unit to different

positions in the rooms.

Reasons of Measurement Error

• Dirty probe tip

Please refer to the cleaning process in the manual to make sure the

cleanliness of probe tip.

• Unstable human status, such as: hot or cold baths, physical exercise,

smoking and or drinking hot and cold beverages, etc.

Please avoid exercise, bathing for 30 minutes prior, keep the forehead clean

and dry before measurement.

• Unstable environment, such as: the vent of air conditioning or fan.

Make sure the thermometer has been at room temperature for 15 minutes

before use.

• Wrong measurement area

Users should measure the correct position as Fig. 1 shown on page 13.

• Wrong measurement way

When scanning, the probe should face the midde of the forehead area & the

measurement distance should be as close as possible.

Help

routers),