Motorola MBP41S-2 Kullanıcı Kılavuzu - Sayfa 12
Bebek Monitörü Motorola MBP41S-2 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Motorola MBP41S-2 29 sayfaları. Digital video monitor
Ayrıca Motorola MBP41S-2 için: Kullanıcı Kılavuzu (27 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar)
Sayfayı Yazdır
3. Using the Digital Video Baby Monitor
3.1
Setting up
• Place the Baby Unit in a convenient location (e.g. on a table) and point the
camera lens towards the area you want to monitor.
• Adjust the Baby Unit's camera angle by rotating the camera up, down, left
and right until you are satisfied with the image in the Parent Unit.
NOTE
Do not place the Baby Unit within baby's reach! If there is interference with the
picture or sound, try moving the units to different locations, and ensure that they
are not close to other electrical equipment.
3.2
Night Vision Mode
The Baby Unit has 8 high-intensity infrared LEDs for picking up clear images in
the dark. When the built-in photo sensor detects a low level of ambient light, the
LEDs will automatically activate and the screen on the Parent Unit will display in
black and white. The
3.3
Talk Mode
Press and hold the
the Baby Unit's loudspeaker. The
screen.
3.4
Video ON/OFF
V
Press the
VIDEO ON/OFF button to turn the LCD display on or off. The
audio monitor will remain On.
3.5
Temperature Display (HH °C / °F or LL °C / °F)
The temperature reading from the temperature sensor at the back of the Baby
Unit will be displayed at the top of the LCD screen. The readings will turn RED
if the temperature goes above 29ºC / 84ºF or below 14ºC / 57ºF. The reading
will change to HH °C / °F if the temperature goes above 36ºC / 97ºF. The
reading will change to LL °C / °F and icon flashes in red if the temperature goes
below 1ºC / 34ºF.
12
icon will be displayed on the screen.
T
TALK button on the Parent Unit to talk to your baby through
T
icon will be displayed at the top of the LCD
Using the Digital Video Baby Monitor