Motorola VM50G-4 Hızlı Başlangıç Kılavuzu
Bebek Monitörü Motorola VM50G-4 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Motorola VM50G-4 2 sayfaları. 5.0" video baby monitor
Ayrıca Motorola VM50G-4 için: Kullanıcı Kılavuzu (32 sayfalar)
Sayfayı Yazdır
QUICK START GUIDE
For a full explanation of all features and instructions, please refer to the User's
Guide (available for download from motorolanursery.com).
1. Setting up your Digital Video Baby
A. Connecting the power supply for the Baby Unit.
MODELS:
VM50G
VM50G-2,
VM50G-3,
VM50G-4
Strangulation hazard. Children have STRANGLED in cords.
Keep this cord out of the reach of children (more than 1 meter
away). Do not remove the tags from the AC Adapters. Only use
the AC Adapters provided.
B. Connecting the power supply for the Parent Unit.
• Connect the small plug of the power adapter to the parent unit and the other
end to the electrical outlet.
• Only use the enclosed adapter (5V DC/1000mA).
• A rechargeable battery (Lithium-ion battery 3.8V/2000mAh) inside the
Parent Unit allows you to move it without losing the link and picture from the
Baby Unit. The battery gives up to 5 hours operation for the Parent Unit. We
recommend you charge it for at least 16 hours before first use, or when the
Parent Unit indicates the battery is low.
• Press and hold the POWER button 0 on the top of the Parent Unit to turn it
ON.
NOTE
When the Baby and Parent Units are both turned on and within range, the Parent Unit
should show a color image from the Baby Unit camera, but if the room is dark, the image
will be in black and white, with a
Baby Unit.
2. Basic operation of the keys
Parent Unit
Baby Unit
3. General Information
If your product is not working properly, read this Quick Start Guide or the User's Guide of
one of the models listed on page 1.
Please visit us at: motorolanursery.com/support
Consumer Products and Accessories Limited Warranty ("Warranty")
Thank you for purchasing this Motorola branded product manufactured under license by
Meizhou Guo Wei Electronics Co. LTD ("MZGW').
What Does this Warranty Cover?
Subject to the exclusions contained below, MZGW warrants that this Motorola branded
product ("Product") or certified accessory ("Accessory") sold for use with this product
that it manufactured to be free from defects in materials and workmanship under normal
consumer usage for the period outlined below. This Warranty is your exclusive warranty
and is not transferable.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY HAVE OTHER
RIGHTS THAT VARY BY STATE, PROVINCE OR COUNTRY. FOR CONSUMERS WHO ARE
COVERED BY CONSUMER PROTECTION LAWS OR REGULATIONS IN THEIR COUNTRY
OF PURCHASE OR, IF DIFFERENT, THEIR COUNTRY OF RESIDENCE, THE BENEFITS
CONFERRED BY THIS LIMITED WARRANTY ARE IN ADDITION TO ALL RIGHTS AND
REMEDIES CONVEYED BY SUCH CONSUMER PROTECTION LAWS AND REGULATIONS.
FOR A FULL UNDERSTANDING OF YOUR RIGHTS YOU SHOULD CONSULT THE LAWS
OF YOUR COUNTRY, PROVINCE OR STATE.
Who is covered?
This Warranty extends only to the first consumer purchaser, and is not transferable.
Monitor
WARNING:
ON/OFF button
UP/DOWN buttons
LEFT/RIGHT
buttons
MENU button
OK button
VIDEO button
TALK button
Volume buttons
RESET button
ON/OFF switch
PAIR button
• Connect the USB plug of the power
adapter to the Baby Unit and the other end
to a suitable mains power outlet.
• Only use the enclosed adapter (5V DC/
1000mA).
• Ensure the ON/OFF switch is at the "ON"
position.
icon showing, due to the infra-red illumination by the
Press and hold to switch the Parent Unit ON/OFF.
Press to tilt the camera up or down.
Press to move up or down menu settings.
Press to pan the camera left or right.
Press to move left or right across menu options.
Press to open menu options or exit the menu.
Press to confirm a selection.
Press to turn the LCD screen ON/OFF.
Press and hold to talk to your baby.
Press -/+ to adjust the volume of the parent unit.
Press and hold with a small pin to reset the unit.
Slide the switch to the left to switch on the Unit.
Slide the switch to the right to switch off the Unit.
Press and hold the button on the underside of the Baby
Unit to register the camera to a Parent Unit.
UK EN