Motorola D1013 Kullanıcı Kılavuzu - Sayfa 19

Telsiz Telefon Motorola D1013 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Motorola D1013 30 sayfaları. Motorola d1010 series digital cordless phone with answer machine

Registration

Up to 5 handsets can be registered to one base station. Additional handsets must be registered
to the base before you can use them.
• The instructions described below apply specifically to your D1010 handset. If you wish to
register another manufacturer's handset, the instructions may vary. In this case, please refer to
the manufacturer of the additional handset.
• The Master PIN is required before you can register or unregister handsets. The default PIN is
0000.

Register a handset

At the base:
p
1. Press and hold the
button on the base station for at least 3 seconds. The base station
emits a beep when it is ready to accept registration. You have 90 seconds in which to register
a handset.
At the handset:
m
d
1. Press
and scroll
to
ADVANCED SET
d
m
2. Scroll
to
REGISTRATION
and press
.
u
d
3. If necessary, scroll
or
to display
REGIST. BASE
the registered base number is flashing. Enter the number of the base on which you wish to
register your handset.
1
If you have only 1 base station, press
4. When the display shows PIN----, enter the base PIN.
-
When the handset registers with the base, it is assigned a handset number.

Select a base

You can register your D1010 handset with up to 4 bases. Once registered, you can switch
between bases, for example, bases at home and at work.
m
d
1. Press
and scroll
to
ADVANCED SET
d
m
2. Scroll
to
REGISTRATION
and press
.
m
3.
SELECT BASE
is displayed. Press
.
-
The available bases are displayed with the current base number flashing.
4. Enter the number of the base you want – 1,2,3 or 4 and press
-
When the base is found you hear a beep. If not found, the display shows UNREGISTERED.

Unregister a handset

m
d
1. Press
and scroll
to
ADVANCED SET
d
m
2. Scroll
to
UNREGISTER
and press
.
m
3. Enter the 4 digit master PIN and press
-
Display shows the registered handset numbers.
u
d
4. Scroll
or
to select the handset you want to delete and press
-
UNREGISTERED
is displayed on the handset screen.
Advanced settings
m
and press
.
m
and press
.
BASE 1 2 3 4
is displayed and
1
. If you have 2 base stations, press
or
m
and press
.
m
.
m
and press
.
.
m
.

PIN

The 4-digit master PIN is used when registering or unregistering a handset and when changing
some settings on your D1010. The default setting is 0000. You can change this PIN for more
security.
m
d
1. Press
, scroll
to
ADVANCED SET
d
m
2. Scroll
to PIN. Press
3. Enter the current 4 digit master PIN and press
4. Enter the new PIN and press
NOTE
Make a note of your PIN. If you forget your PIN you will need to reset your product.

Reset

This will reset your D1010 to its default settings.
m
d
1. Press
, scroll
to
ADVANCED SET
d
2. Scroll
to
RESET
UNIT. Press
3.
CONFIRM?
is displayed. Press
NOTE
Entries stored in the phonebook and new answer machine messages are retained.
2
, etc.
m
and press
.
.
m
. (Default setting 0000).
m
.
m
and press
.
m
.
m
.
19