Motorola D201 Kullanıcı Kılavuzu - Sayfa 17

Telsiz Telefon Motorola D201 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Motorola D201 28 sayfaları. D200 series digital cordless phone
Ayrıca Motorola D201 için: Şartname Sayfası (2 sayfalar)

Sayfayı Yazdır
Motorola D201 Kullanıcı Kılavuzu
Allegro_CID.book Page 15 Tuesday, January 15, 2008 3:07 PM
to select "DIAL MODE" and press
3. Press
or
4. Press
or
to select "TONE" or "PULSE" and press

Registering a new handset

When you register a new handset to your base, you will be
asked to enter the base PIN code.
The pre-set PIN code is 0000. If you wish to change this code,
see page 15.
Each handset can only be registered to one base at a time.
Before registering, make sure the new handset is fully charged
and that you have the base and handset in front of you.
On the handset you want to register:
1. Press
to access the main menu.
2. Press
or
to select "REGISTRATION" and press
3. Press
or
to select your base number.
On your base:
4. Press and hold
until you hear the registration tone. You
are now in 'subscription mode'.
If the base already has the maximum number of handsets (5)
registered to it, you will hear the reject tone and you will need
to de-register one of the existing handsets before you can
register the new handset.
See the next section for de-registering handsets.
On the handset you want to register:
5. Press
.
6. Enter the base PIN code. The pre-set base PIN code is 0000.
7. Press
.
You will hear a confirmation tone when registration is
.
complete.
When in standby mode, the new handset number will be
.
displayed.
The handset will automatically be allocated with the next
available handset number.
If the registration fails, the handset display returns to the
display of before the registration.

De-register a handset

If you have more than one handset registered to your base,
you can de-register a handset.
Before de-registering, make sure all handsets and the base are
in standby mode.
1. On a handset not to be de-registered, press
.
access the main menu.
until "BS SETTINGS" is displayed and press
2. Press
or
.
to display "TERMINATE HS" and press
3. Press
or
4. "PIN ?" is displayed. Enter your PIN code and press
5. Press
or
to display the handset you want to de-register
and press
If the handset has been de-registered from the base
successfully, you will hear a confirmation tone.

Base PIN code

You need to enter the base PIN code when you are registering
handsets. For security reasons you may wish to change the PIN
code. You can choose a PIN code up to 4 digits long. If you reset
the base from the handset, the base PIN code will be 0000.
to
.
.
.
15