Motorola I903 Kullanıcı Kılavuzu - Sayfa 25

Telsiz Telefon Motorola I903 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Motorola I903 44 sayfaları. Dect 6.0 digital cordless phone with wireless headset and answering system

Sayfayı Yazdır
Motorola I903 Kullanıcı Kılavuzu
NOTE
If the pulse mode is selected, press TONE/* to switch from
pulse to tone dialing temporarily when dialing out. After the
call is ended, the dial mode will change back to pulse.
3.16

Setting the flash time

600MS
The default flash time is
need to change this setting unless advised to do so.
1. Press MENU and then VOL+ or REDIAL/VOL- to select
SETUP BS
.
2. Press MENU and then VOL+ or REDIAL/VOL- to select
FLASH TIME
.
3. Press MENU and then VOL+ or REDIAL/VOL- to the
flash time you want. (8 options are available:
250
300
400
600
700MS
,
,
,
and
4. Press MENU to save.
3.17

Setting the area code

1. Press MENU and then VOL+ or REDIAL/VOL- to select
SETUP BS
.
2. Press MENU and then VOL+ or REDIAL/VOL- to select
AREA CODE
.
Using the Phone
. It is unlikely that you should
90
100
,
,
)
3. Press MENU and enter the area code.
4. Press MENU to save.
3.18

Registration

3.18.1 Registering a handset

Up to 5 handsets or wireless headsets can be registered to
one base. The original handset is pre-registered to use.
Additional handsets must be registered to the base before
you can use them.
To register an additional handset,
1. Press MENU and then VOL+ or REDIAL/VOL- to select
SETUP HS
.
2. Press MENU and then VOL+ or REDIAL/VOL- to select
110
,
REGISTRATION
.
3. Press MENU and then VOL+ or REDIAL/VOL- to select
YES
NO
or
.
YES
4. Select
and press MENU to enter the registration
procedure as follows:
1. Press and hold FIND for 4 seconds on the base.
2. Place the unregistered cordless handset on the base
or charger.
25