Motorola 6871436M01-J Hızlı Referans Kartı - Sayfa 2

Radyo Motorola 6871436M01-J için çevrimiçi göz atın veya pdf Hızlı Referans Kartı indirin. Motorola 6871436M01-J 4 sayfaları. Xir series

Sayfayı Yazdır

Audio Indicators for Programmable

Buttons

Some programmable buttons use audio

indicators to indicate the change as they

alternate between two different choices.

Programmable

Positive

Button

Indicator Tone

Zone

In Zone 2

Repeater/

In Talkaround

Talkaround

mode

Start Scan

Scan

operation

Operating in

Squelch

tight squelch

Transmitting at

Power Level

low power

The horns

Horns and

and lights

Lights

feature is on

Tones and

All tones and

Alerts

alerts are on

Powering Up and Turning Off the

Radio

Press the On/Off Button briefly to turn on the

radio, and press and hold the On/Off Button to

turn it off.

Adjusting the Volume

Turn the Volume Knob clockwise to increase

volume or counterclockwise to decrease volume.

English

NOTE: Your radio can be programmed to have a

minimum volume offset where the

volume level cannot be turned down

fully. Check with your dealer or system

administrator for more information.

Negative

Accessing the Radio from Password

Indicator Tone

Power up the radio.

In Zone 1

You hear a continuous tone.

In Repeater

mode

Press the Channel Rocker to select a digit

Stop Scan

and Front Button P2 to enter the selected

operation

digit. Enter the remaining digits of the

password in the same manner.

Operating in

normal squelch

When the last digit of the four-digit password

Transmitting at

is entered, your radio automatically checks

high power

the validity of the password.

The horns

If the password is correct:

and lights

Your radio proceeds to power up.

feature is off

All tones and

If the password is incorrect:

alerts are off

You hear a continuous tone. Repeat Steps 1

and 2.

After the third incorrect password, your radio

enters into locked state. A tone sounds and

the yellow LED double blinks.

Your radio enters into locked state for 15

minutes, and responds to inputs from On/Off

button.

NOTE: The radio is unable to receive any call,

including emergency calls, in locked

state.

The use of Emergency footswitch

cancels out password input to access the

radio.

Selecting a Zone

Press the programmed Zone button.

You hear a positive indicator tone, indicating

the radio has switched from Zone 1 to Zone 2.

You hear a negative indicator tone, indicating

the radio has switched from Zone 2 to Zone 1.

Selecting a Radio Channel,

Subscriber ID, or Group ID

Select the zone by pressing the programmed

Zone button to switch between zones.

Press the Channel Rocker to select the

required channel, subscriber ID, or group ID.

Capacity Plus

Press the Channel Rocker to access channels

with Capacity Plus.