Motorola 89FT3798 Manuel - Sayfa 19

Radyo Motorola 89FT3798 için çevrimiçi göz atın veya pdf Manuel indirin. Motorola 89FT3798 32 sayfaları.

Sayfayı Yazdır

#ELP_Display.book Page 19 Friday, May 14, 1999 5:39 PM

TALKBACK

If the programmable Talkback option is set, you

can respond to any calls received during the

scan operation by pressing the PTT before the

programmed hang-time ends. Check with your

dealer for details.

DELETING A NUISANCE CHANNEL

If a channel continually generates unwanted

calls or noise (a "nuisance" Channel), you can

temporarily remove it from the scan list by

performing a Nuisance Channel Delete

operation.

1. While the radio is on the Nuisance Channel,

press the preprogrammed Nuisance Channel

Delete button until you hear a tone.

2. Release the Nuisance Channel Delete button.

The nuisance channel is deleted.

NOTE: You cannot perform a Nuisance Channel

Delete on a priority channel or if there is only

one remaining channel in the scan list.

ADDING A DELETED NUISANCE

CHANNEL BACK TO THE SCAN

LIST

Press the Scan button to stop the scan oper-

ation.

Press the Scan button again to re-start the

scan operation. The Deleted Nuisance Chan-

nel is reinstated to the scan list.

PRIORITIZATION OF A SCAN LIST

MEMBER

You may want your radio to check a particular

channel more frequently for calls. Prioritization

of scan list members is done by your dealer

using the Customer Programming Software.

Check with your dealer for details.

Priority Channel

Scanning Sequence

Ch1

Ch2

None speciﬁed

...

Ch4

Ch1

Ch2

Ch1

Channel 2

Ch2

Ch4

Ch3

Ch2

Ch3

Ch2

...Ch1

English