Motorola APX 4000 Manuel - Sayfa 20

Radyo Motorola APX 4000 için çevrimiçi göz atın veya pdf Manuel indirin. Motorola APX 4000 25 sayfaları.

USING GPS:

Zone

4-WAY NAVIGATION BUTTON

Loc

Info

Some APX 4000/6000 radios have a GPS feature built into

the radio. It communicates with the GPS system using the

radio's antenna. To access your latitude and longitude

from the radio, use the 4-way navigation button to scroll

Select

over until "Loc" appears on the menu. Press the

Buttons

appropriate menu select button to access the location

feature of the radio.

Once in the scan screen you can see three options on the

bottom of the display: "Optn" is option, "Rfsh" is refresh,

and "Exit" leaves the GPS menu.

The option selection enables you to set waypoints using the

GPS feature of the portable radio.

Refresh causes the radio to update its current location

using data received from the Global Position System

satellites in orbit around Earth.

Choosing exit simply enables you to go back to the main

display.

If the GPS feature of your radio is enabled, you will see a

small satellite icon on the main display of your radio (shown

at left). If the radio has a steady fix using the GPS system,

the satellite icon will be solid. If the satellite icon is

blinking, it means the radio has lost touch with the GPS

system. This would be a common occurrence inside of

buildings. You may see a small "IP" icon on the display, as

well. This indicates data packets may be exchanged with a

computer, most likely a CAD or mapping program at a

dispatch center that is capable of using the GPS feature of

your radio.