Motorola GM1200E Kullanıcı Kılavuzu - Sayfa 9

Radyo Motorola GM1200E için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Motorola GM1200E 22 sayfaları. Dealer programming software dps
Ayrıca Motorola GM1200E için: Kurulum Kılavuzu (8 sayfalar), Kurulum Kılavuzu (36 sayfalar)

Sayfayı Yazdır

Dedicated Calls

Dedicated calls can be made from either the Base

Call button or from the keypad. Press the Base Call

button to make a call to the most commonly used

pre-programmed number or hold down one of the

keypad keys (0 to 9) for a preset period to make a

call to one of ten (1 of 10) preprogrammed numbers

which are the ﬁrst ten entries (1 to 9, 0=10) in the

short form dial list. The selected number will be

displayed and the conversation can go ahead.

Manual Dialling

To make a call enter the telephone number, the

identity of the radio or group of radios via the keypad

(11), e.g. "213" followed by

213

Last Number Redial

The last number dialled by the radio is stored in the

memory of the radio. For status calls only the called

number will be stored, not the status message.

Partially entered numbers are also stored.

or PTT:

NAME UNKNOWN

Making a Call/Ending a Call/Cancelling a Call

The stored number can be displayed when the radio

is in the IDLE STATE. This number may be recalled

by pressing the PTT key (18). The number may also

be edited, see Keypad Edit.

Keypad Edit

Before a call is initiated the last digit may be deleted

by pressing the clear/edit button

button again to delete the next digit and enter the

correct digit. If the clear/edit button

pressed during a call, the call will be ended.

Ending a Call

A call should always be ended by pressing the clear

button

(10), by replacing the microphone, or by

dialling

. See "Call Progress - Ending a

Call".

Cancelling a Call

At any time while setting up a call it may be

cancelled by pressing the clear button

dialling

. See "

Call Progress - Cancelling a

Call

Making a Call

(10). Press the

(10) is

(10) or by

English