Motorola P040 Kullanıcı Kılavuzu - Sayfa 17

Radyo Motorola P040 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Motorola P040 20 sayfaları. Professional radio
Ayrıca Motorola P040 için: Kullanıcı Kılavuzu (20 sayfalar), Satış Kılavuzu (44 sayfalar)

Sayfayı Yazdır

SCAN

You can monitor several channels in order to

receive any call that is transmitted on any of these

channels.

Once the radio's scan operation is activated and the

radio detects a call coming through a channel in its

scan list, it switches to that channel for you to

receive the call.

STARTING OR STOPPING A SCAN

OPERATION

To start or stop a scan operation:

1. Press the Scan button (only available if

programmed by your dealer) to start a scan

operation. You will hear a positive indicator

tone.

2. Press the preprogrammed Scan button again

to stop the scan operation. You will hear a

negative indicator tone.

NOTE: The LED indicator will blink (green) during a

scan operation.

TALKBACK

If the programmable Talkback option is set, you can

respond to any calls received during the scan

operation by pressing the PTT before the

programmed hang-time ends. Check with your

dealer for details.

DELETING A NUISANCE CHANNEL

If a channel continually generates unwanted calls or

noise (a "nuisance" Channel), you can temporarily

remove it from the scan list by performing a

Nuisance Channel Delete operation.

1. While the radio is on the Nuisance Channel,

press the Nuisance Channel Delete button

(only available if programmed by your dealer)

until you hear a tone.

2. Release the Nuisance Channel Delete

button. The nuisance channel is deleted.

NOTE: You cannot perform a Nuisance Channel

Delete on a priority channel or if there is only

one remaining channel in the scan list.

English