Motorola T600 FRS Hızlı Başlangıç Kılavuzu - Sayfa 2
Radyo Motorola T600 FRS için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Motorola T600 FRS 4 sayfaları.
Sayfayı Yazdır
Setting Up the FRS Radio
To use your FRS Radio, you must:
Find your neighborhood Channel and Tone settings.
Configure the Channel and Tone settings on the FRS Radio.
Transmit and receive from a location free from obstructions.
Be within range of another FRS radio set to the same Channel and Tone.
Find your Channel and Tone Settings
To communicate, all radios in your group must be set to the same Channel and Tone. A city‐wide plan
was developed to help distribute radio traffic and provide a starting point for citizens. If you aren't able
to connect with a neighbor on the assigned neighborhood channel/tone, try an adjoining neighborhood
channel.
This example shows finding the Channel and Tone settings for the "Palisades East" neighborhood in the
"Southeast Division" of Lake Oswego.
NOTE: The Secondary FRS Channel and Tone settings are for communications over a short distance; such
as between CERT/Neighborhood Emergency Response Teams conducting assessments on a single
street.
Power‐On and Volume Setting on Your FRS Radio
After you have charged the battery on your FRS radio, follow these steps to power‐on and set the
volume on your radio.
1. Long press the Mode/Lock button to power‐on the radio.
NOTE: Long press the Mode/Lock button to power it off.
2. Turn FRS radio volume up and down by pressing "
NOTE: The volume setting appears as a number 0 to 7 in the Tone indicator.
Configure the Channel on Your FRS Radio
Your FRS radio has 22 channels. The channel corresponds to the frequency the radio uses to transmit.
1. With the radio on, press the Menu/Lock button until the Channel number starts to flash. The
channel number flashing is the currently set channel.
Lake Oswego Fire Department 300 B Avenue Lake Oswego, OR 97034
503‐635‐0275 https://www.ci.oswego.or.us
‐
+
" or "
" on the Volume/Scroll button.