ABB PSTX30 Uygulama Kılavuzu - Sayfa 10
DC Sürücüler ABB PSTX30 için çevrimiçi göz atın veya pdf Uygulama Kılavuzu indirin. ABB PSTX30 20 sayfaları. Softstarter
Ayrıca ABB PSTX30 için: Yedek Parça Talimatı (6 sayfalar), Servis Talimatı (10 sayfalar), Hızlı Başlangıç Kılavuzu (4 sayfalar)
Sayfayı Yazdır
3.2
Control supply and control circuit
Wires in industrial control applications are divided into
three groups: main power supply, control supply and
control circuit.
Main power supply (1L1, 3L2, 5L3, 2T1, 4T2, 6T3)
Control supply voltage (terminals 1 and 2)
Control circuit (terminals 13 - 21).
3.2.1
Control supply voltage -
2
terminals 1 and 2
Connect neutral and phase to terminal 1 and 2.
See Figure 4.
INFORMATION
Only use 100-250 V, 50 / 60 Hz supply voltage.
5
Tightening torques and cable dimensions.
L
N
100-250V
50/60 Hz
K4
3.2.2
Functional earth - terminal 22
Softstarters type PSTX85...PSTX370 should be earthed
using the terminal 22 as shown in Figure 5 (one
connection is sufficient). Connect the cable to an earthing
point close to the softstarter. The cable should be as
short as possible. A suitable earthing point is next to the
softstarter on the mounting plate, which should also be
earthed.
INFORMATION
This is not a protective earth, it is a function
earth. The earthing cable should be as short as
possible. Maximum length 0.5m.
INFORMATION
Do not use functional earth in IT-networks,
commonly found in for instance marine
applications.
Tightening torques and cable dimensions.
L
N
100-250V
50/60 Hz
K4
Connection | Application manual: Waste water pump |
10
K5
K6
Start Stop In0 In1 In2
GND +24V
K5
K6
Start Stop In0 In1 In2 DGND GND +24V
4
Figure 4:
Supply voltage, terminal 1, 2
M3,5
3,5 x 0,6 mm
(0.138 x 0.024 in)
0,5 Nm
4,3 lb.in
5
Figure 5:
Functional earth, terminal 22
M3
3,5 x 0,6 mm
(0.138 x 0.024 in)
0,5 Nm
4,3 lb.in
1SFC132104M0201
AWG 12 ... 24
2
0,2 .. 2,5 mm
2
2x0,2 .. 1,5 mm
2
0,2 .. 2,5 mm
2
2x0,2 .. 1,5 mm
AWG 12 ... 24
2
0,2 .. 2,5 mm
2
2x0,2 .. 1,5 mm
2
0,2 .. 2,5 mm
2
2x0,2 .. 1,5 mm