Epson LABELWORKS PX750-LW Kullanıcı Kılavuzu - Sayfa 4

Etiket makinesi Epson LABELWORKS PX750-LW için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Epson LABELWORKS PX750-LW 4 sayfaları.

Sayfayı Yazdır
Epson LABELWORKS PX750-LW Kullanıcı Kılavuzu
Customizing Labels
Setting the Format and Style (Edit menu)
You can decorate your label by setting the following.
MEMO
The setting items displayed when you press
di er depending on the label type you create.
Layout
Left, Center, Justify, Right
Adjusts the layout when multiple lines are used.
Frame & Table
Decorates the text with a frame or inserts a table.
Style
Outline, Normal, Shadow, S+O
Applies a character style to text.
Char. spacing
None, Narrow, Normal, Wide
Sets the inter-character spacing.
Border & Line
Strikeout, Underline, None, Border, Round brdr,
Shading, Brdr mesh, Round mesh
Applies border, underline, shade etc. to text.
Char. Width
Smaller, Small, Narrow, Normal, Wide
This allows you to change the width or height of
characters.
Bold & Italic
Italic, Normal, Bold, B+I
Changes the text in bold or italics.
Length
This setting is the same as when
is pressed.
"Setting the Label Length"
Margins
This setting is the same as when
+
is pressed.
"Setting the Margins"
Changing the Font Size
You can change the font size of text or a block line by
line. Among the preset setting items, select one with
the same number of lines as that of the text or block you
want to change.
MEMO
You may not be able to change the font size depending
on the label type you create.
Saving Frequently Used Labels
By saving frequently used labels, you will be able to easily recall and print from
them next time.
Up to 100 labels can be saved.
Saving a label
1. Press
.
2. Select " Save " with
/
and press
3. Select a registration number with
/
press
.
The registration con rmation screen appears.
4. Con rm the registration number and then press
Recall the saved label
1. Press
.
2. Select " Recall " with
/
and press
3. Select a registration number with
/
press
.
The recall con rmation screen appears.
4. Con rm the registration number and then press
Deleting the saved label
1. Press
.
2. Select " Delete" with
/
and press
3. Select a registration number with
/
press
.
The deletion con rmation screen appears.
4. Con rm the registration number and then press
Orientation
AB A
,
Sets the orientation of the text.
AB A
Font size
This setting is the same as when
is pressed.
"Changing the Font Size"
Font
This setting is the same as when
is pressed.
"Changing the Font"
Procedure for setting
1. Place the cursor.
Place the cursor on the left of the characters to
which you want to apply a function.
If you apply the function to a speci c line or block,
con rm that the cursor is in the line or block.
2. Press
.
Example: to apply "Bold & Italic"
3. Select "Bold & Italic" with
/
and press
4. Select "B + I" with
/
and press
5. Select an area to which you want to apply the
function with
/
and press
When "Character" is selected, the function is applied
to all characters on the right of the cursor.
1. Press
.
2. Each time you press
, the font size changes.
Utilizing Print Functions
Enlarge print
You can create a label that is larger than the width of a single label.
Print the created content separately on multiple labels and then put them
together to use as a single label.
.
1. Press
or the number keys and then
2. Select " Enlarge print " with
3. Select " *2size " with
.
4. Select " 2/2 " with
5. Select " Start print? " with
Printing starts.
MEMO
The function remains enabled even after printing. To disable the function, select "O ".
.
or the number keys and then
Mirror print
On
.
1. Press
2. Select " Mirror print " with
3. Select " On " with
4. Select " Start print? " with
.
Printing starts.
or the number keys and then
MEMO
The function remains enabled even after printing. To disable the function, select "O ".
.
Print copies
1. Press
2. Select " Print copies " with
3. Enter the number of print copies and then press
4. Select " Start print? " with
Printing starts.
MEMO
The function remains enabled even after printing. To disable the function, set the
number of print copies to "1".
Changing the Font
Changes the font type of text.
1. Press
.
2. Each time you press
SansS.
SansS. HG
SansS. ST
Gothic
B. Gothic
Roman
US Roman
.
Changing the Text Orientation
.
Changes the text orientation to vertical or horizontal.
.
MEMO
You may not be able to change the text orientation depending
on the label type you create.
1. Press
.
Each time you press
, the setting switches between
"Horizontal" and "Vertical".
Horizontal
Vertical
When creating "Mix-Len"
1. Press
.
2. Select the orientation with
Hori.
Vert.1
Vert.2
+
+
.
/
and press
.
/
and press
.
/
and press
.
/
and press
.
O
+
.
/
and press
.
/
and press
.
/
and press
.
+
.
/
and press
.
.
/
and press
.
Setting the Label Length
You can set the length of label or block.
MEMO
, the font changes.
When creating a special label, you can set the length again.
Setting items for special label is displayed after pressing
CL Roman
1. Press
2. Select the setting method of the length with
Mincho
/
Auto: Automatically adjusts the label length depending
Set: Sets the label length.
Gyosho
When "Set" is selected in procedure 2,
3. Select the alignment for the text with
Reisho
press
Left, Center, Justify, Right
BR
Setting the Margins
CB
Sets the left and right margins.
MEMO
You may not be able to set the margins depending on the label
ScriptPL
type you create.
1. Press
2. Select the type of margins with
Minimum, Short, Middle, Long
Adding Block
By dividing text into blocks, you can change the style and the
number of lines block-by-block.
Display
1. Press
/
and press
.
A new block is started from the character next to the
cursor.
Changing the Printer Settings
Setting items
Auto cut
Auto cut:
Sets whether or not to cut automatically.
Half cut:
When "Auto cut" is set to "On", the function "Half cut" for precutting just the
label part to make the backing paper easy to peel o can be set.
Print density
Sets the print density.
Drop stop
This function is useful for a xing consecutively printed labels one at a time.
Select "On" to avoid a printed label from dropping. A printed label stays at
the tape eject slot.
When printing multiple copies, printing of the second or later labels starts
each time you remove a printed label.
This function is only available when the label length is 28 mm or more, "Auto
cut" is set to "On", and "Half cut" is set to "O ".
Backlight
Sets the display backlight to On or O .
Language
You can select the language shown on the display from the following:
Dansk, Deutsch, English, Español, Français, Italiano, Nederlands, Norsk,
Português-Br, Português-EU, Suomi, Svenska, Türkçe
inch:cm
The unit of length used to indicate the label size can be switched between
inch and cm.
MEMO
Version: To make sure the version number that has been installed in the printer.
Procedure for setting
1. Press
+
.
2. Select the desired function with
3. Select the desired item with
.
.
and press
.
on the length of text.
Setting range: 1 to 99.9 cm
/
and
.
+
+
.
/
and press
.
+
Label
Block 1
Block 2
Block 1
Block 2
Block 3
Block 3
+
.
+
/
and press
.
/
and press
.