Argus Optical Light Source Kullanıcı Kılavuzu - Sayfa 9
Test Ekipmanları Argus Optical Light Source için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Argus Optical Light Source 14 sayfaları. Dual-wavelength laser source
Sayfayı Yazdır5.4 Frequency Output
The instrument defaults to CW when it switches on.
When it is set to CW, there is no frequency on display.
Press the "CW/Hz" Key to select the output among 270Hz, 1kHz and 2kHz.
1
„CW" is not displayed on the LCD.
5.5 Auto-wavelength Recognition
Press the "TWIN" key to turn on and off the auto-wavelength recognition function.
Note:
1). It is suggested to turn off the "TWIN" code when you do not use it. The optical
power output of the laser source will be fluctuated.
2). The function of "TWIN" and Modulation cannot work together. When the
"TWIN" is on, the modulation of the laser source module is closed automatically.
3). The wavelength will be shifted automatically according to the recognition
when the "TWIN" of the power meter module is on. The modulated signal of
270Hz, 1kHz and 2kHz cannot be recognized and received.
5 Operation
9