Motorola H390 - Headset - In-ear ear-bud Hızlı Başlangıç Kılavuzu
Kulaklıklar Motorola H390 - Headset - In-ear ear-bud için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Motorola H390 - Headset - In-ear ear-bud 32 sayfaları. User manual
Ayrıca Motorola H390 - Headset - In-ear ear-bud için: Hızlı Başlangıç Kılavuzu (6 sayfalar), Motomanual (15 sayfalar), (Fransızca) Manual De Démarrage Rapide (6 sayfalar)
Sayfayı Yazdır
BEFORE YOU BEGIN
Before using this product, read the Important Safety and Legal
Information pamphlet and follow its instructions.
Take a moment before you get started to
familiarize yourself with your new
H390 Headset.
motorola
H390
Volume
Buttons
Call Button
Quick Start Guide
Indicator Light
Motorola, Inc.
3
Consumer Advocacy Office
1307 East Algonquin Road
Schaumburg, IL 60196
Step B - SET YOUR PHONE TO LOOK FOR
www.motorola.com
YOUR HEADSET
1-877-MOTOBLU
For most Motorola phones:
1-888-390-6456 (TTY/TDD United States for
hearing impaired)
1
On your Motorola phone, press
Settings > Connection > Bluetooth Link > Handsfree
Guide Number: 68000202001-A
> Look for Devices.
The phone lists Bluetooth devices it finds.
2
Select Motorola H390.
3
Select OK or Yes to pair your headset with
Bluetooth QD ID: Bxxxxxx
your phone.
4
Enter the passkey: 0000
MOTOROLA and the Stylized M Logo are registered in the US
Patent & Trademark Office. The use of wireless devices and their
5
Select OK.
accessories may be prohibited or restricted in certain areas.
Always obey the laws and regulations on the use of these
When your headset successfully pairs and
products. The Bluetooth trademarks are owned by their
connects with your phone, the indicator light
proprietor and used by Motorola, Inc. under license. All other
changes from steadily lit to flashing blue and
product or service names are the property of their respective
purple.
owners.
Note: These steps are for most Motorola phones.
For other phones, see your phone's user's guide.
© 2008 Motorola, Inc. All rights reserved.
1
CHARGE
Your Headset's Battery
Charging
Port
1
Verify slide switch is in the off position (toward
the charging port).
2
Plug the Motorola charger into the end of the
headset.
Earhook
The indicator light turns red or yellow when the
battery is charging. It may take up to 1 minute
Speaker
for the indicator light to turn on. When the
headset's battery is fully charged (about 2
hours), the indicator light turns green.
3
Disconnect the charger.
Indicator
Light
Microphone
Note: Headset is not functional while charging.
Note: This product uses a lithium ion, rechargeable,
Power Button
non-replaceable battery. Under normal use, the expected life
of the rechargeable battery is approximately [xxx] charges.
4
PAIR
TEST AND USE
CONTINUED
Your Phone
Your phone and headset are now paired and
ready to make and receive calls.
To make a call:
M
(
Menu
)
>
1
Place the headset over your ear.
2
On the phone, dial the number you want to
call and press SEND key on your phone.
If your phone and headset are successfully
paired, you will hear ringing on the headset.
After you have successfully paired your
phone and headset, you don't need to
repeat these steps. For daily use, ensure
that your headset is turned ON and that
your phone's Bluetooth feature is ON.
2
3
START BLUETOOTH
FEATURE
Your Phone
Your phone's Bluetooth feature is off by default.
Before you can use your headset, you must pair
To use your headset, you must turn on the
(link) it with your phone.
Bluetooth feature in your phone.
Step A - ENSURE HEADSET IS IN PAIRING
For most Motorola phones (at the main menu):
MODE
1
Menu
> Settings > Connection >
Power on headset by sliding the Power switch
Press
M
(
)
towards the microphone to initiate easy
Bluetooth Link > Setup.
pairing. After a few moments, the indicator
light will be steadily lit in blue to indicate
2
Scroll to Power.
headset is in pairing mode.
3
Select Change.
4
Scroll to On.
5
Press Select to turn on the Bluetooth
feature. The Bluetooth feature remains on
until you turn the feature off.
If the headset does not enter pairing mode,
Note: These steps are for most Motorola phones.
see TROUBLESHOOTING for help.
For other phones, see your phone's user's guide.
TROUBLESHOOTING
USING YOUR H390
My headset will not enter pairing mode.
See
Make sure that any devices previously paired
Features and
with the headset are turned off. If the indicator
Functions Guide
light is not steadily lit in blue, turn off both the
on the reverse side
other device and headset, wait 10 seconds,
for information on
then turn headset back on. Wait for the indicator
using your H390
light to become steadily lit in blue, indicating
the headset is now in pairing mode.
My phone doesn't find my headset.
Make sure the indicator light on your headset is
on (lit in blue) and steady when your phone is
searching for devices (see step 3).
My headset worked before but now it's not
working.
Make sure your phone is on and the Bluetooth
feature is turned on in your phone (see step 2).
If the Bluetooth feature was turned off or was
Note: If desired, your headset can be restored to
original factory settings. This action will erase all pairing
turned on only temporarily, you may need to
restart the Bluetooth feature (see step 2) and
information stored in your headset. Thus, you will need
to pair your phone and headset again (see step 3).
pair your phone and headset again (see step 3).
Support.
Note: To restore your headset to original factory
If you need more help, contact us at
settings, press and hold both Volume buttons and the
1-877-MOTOBLU or visit us at
Call button at the same time for 10 seconds.
www.motorola.com/Bluetoothsupport
PAIR
Your Headset
Power
Button
Indicator Light
(steadily blue
for pairing)