Motorola im240 - Wireless PC Card Modem Kullanıcı Kılavuzu - Sayfa 37

Modem Motorola im240 - Wireless PC Card Modem için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Motorola im240 - Wireless PC Card Modem 43 sayfaları. Motorola wireless modem user's guide

Sayfayı Yazdır

Note: The areas with potentially explosive atmospheres referred to

above include fueling areas such as below decks on boats,

fuel or chemical transfer or storage facilities, areas where the

air contains chemicals or particles, such as grain, dust or

metal powders, and any other area where you would

normally be advised to turn off your vehicle engine. Areas

with potentially explosive atmospheres are often but not

always posted.

Blasting Caps and Areas

To avoid possible interference with blasting operations, turn off your

modem product when you are near electrical blasting caps, or in a

blasting area. Obey all signs and instructions.

Operational Cautions

Cleaning and Drying Considerations

This product is not water proof, and exposing the unit to liquids may

result in permanent damage to the unit.

If your modem product interior gets wet, then do not try to accelerate

drying with the use of an oven or a dryer as this will damage the modem

product and void the warranty. Instead, do the following:

1 Immediately power off the modem product.

2 Remove SIM card (if so equipped) from modem product.

3 Shake excess liquid from modem product.

4 Place the modem product in an area that is at room temperature

and has good air flow.

5 Let the modem product and SIM card dry for 72 hours before

powering on the modem product.

If the modem product does not work after following the steps listed

above, contact your dealer for servicing information.

Clean the external surfaces of the modem product with a damp cloth,

using a mild solution of dishwashing detergent and water. Some

household cleaners may contain chemicals that could seriously

damage the modem product. Avoid the use of any petroleum-based

solvent cleaners. Also, avoid applying liquids directly on the modem

product.

Operational Cautions