Epson TM-C3500 Series Kullanıcı Kılavuzu - Sayfa 2

Etiket makinesi Epson TM-C3500 Series için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Epson TM-C3500 Series 4 sayfaları. Roll to roll system
Ayrıca Epson TM-C3500 Series için: Kullanıcı Kılavuzu (4 sayfalar), Kullanıcı Kılavuzu (4 sayfalar), Buradan başlayın (2 sayfalar), Hızlı Yazdırma Kılavuzu (11 sayfalar), Hızlı Yazdırma Kılavuzu (12 sayfalar)

The Unwinder and the Rewinder can handle media up to 127mm (5") on rolls having 76mm

(3") inside diameter and up to 250mm (9.84") outside diameter. All devices are equipped with

an external auto switching 100/240VAC - 2,5A at 24V

controls all functions.

INSTALLATION

EPS35-JPL

power supply and an electronic circuit

STEP 1

Attach the printer plate (EPS35-JPL) to the

unwinder (U).

Do not fasten the knobs for the moment.

Place the printer on the plate using the guide.

ATTENTION:

If you don't have the printer plate EPS35-JPL,

connect the second base and put the printer

over.

STEP 2

Load the media roll and outside disk then tight

the knob.

Push the media under the tension arm and

then feed it into the printer (look at the printer's

manual how to load media).

STEP 3

Make sure to align the unwinder with the

printer and turn it on. Use the knob to set the

unit at its maximum speed.