Motorola SURFboard SB6182 Kurulum Sayfası
Modem Motorola SURFboard SB6182 için çevrimiçi göz atın veya pdf Kurulum Sayfası indirin. Motorola SURFboard SB6182 2 sayfaları. Surfboard docsis 3.0 cable modem
Ayrıca Motorola SURFboard SB6182 için: Kullanıcı Kılavuzu (21 sayfalar)
SURFboard
®
DOCSIS
3.0 Cable Modem
®
Install Sheet
IMPORTANT
Please contact your service provider if you do not already have
a cable service installed or you do not currently subscribe to a
high-speed cable service.
You may need to provide your modem's MAC address and
serial number (see next page for details).
Connecting the Modem
Before starting, make sure of the following:
• Cable service is up and running.
• Coaxial cable is already connected to the home's cable outlet. If
not, contact your service provider.
• Computer is turned OFF .
1. Connect the coaxial cable to the cable outlet (or cable splitter)
and the other end to the Cable connector on the rear of the
modem.
2. Plug the power cord into the Power port on the rear of the
modem and the other end into an electrical outlet. This will
automatically power ON the modem.
3. Connect the Ethernet cable (included) to the Ethernet port on
the rear of the modem and the other end to the Ethernet port
on the computer (or other device).
dditional product information is available in the SB6182 Cable Modem User Guide.
A
SB6182
www.motorola.com/us/support
Please visit
Starting the Modem
1. Power ON the computer and log in. Check that the Receive,
Send, and Online LEDs on the modem are lit SOLID (not
flashing). See next page for more LED information.
Note: If all three LEDs did not turn ON, check each cable
connection (coaxial, Ethernet, and power) and hand-tighten, if
necessary. Contact your service provider if problem continues.
2. Open a web browser of your choice, such as Internet Explorer,
Firefox, or Google Chrome.
3. Type any valid URL (for example, www.motorola.com) in the
address bar to test the network connection.
- If the web page opens, the modem was set up properly.
- If the web page does not open, you may have to contact your
current service provider to set up your Internet service or
activate your modem.
.