Epson TM-T88IV ReStick Teknik Bülten - Sayfa 4

Etiket makinesi Epson TM-T88IV ReStick için çevrimiçi göz atın veya pdf Teknik Bülten indirin. Epson TM-T88IV ReStick 5 sayfaları. Receipt restick printer in windows using an ethernet connection
Ayrıca Epson TM-T88IV ReStick için: Broşür (2 sayfalar), Teknik Özellikler (2 sayfalar), Kullanıcı Kılavuzu (15 sayfalar), Kullanıcı Kılavuzu (9 sayfalar), Teknik Not (8 sayfalar), Kurulum İçin Adım Adım Kılavuz (14 sayfalar), Manuel (10 sayfalar), Kullanıcı Kılavuzu (20 sayfalar)

Installing Paper Roll

A. Open the printer cover by pressing the cover open button on right top of printer.

B. Remove any unused paper or empty paper cores. Insert a new roll of paper as shown below.

C. When installing a roll of paper – cleanly cut off at least 12 inches of paper. This prevents

adhesive from the paper getting into the printer mechanism.

D. Pull out enough paper to extend past the front of the printer, close the cover and tear off paper

as shown below.

E. Use good quality paper. To confirm that it's thermal paper, scratch the paper on the sensitive

side with your fingernail. A dark line will appear if it is thermal paper.

Size: 80mm, Max outside dia.: 83mm, Paper type: NTP080-80

Open Cover

5. Removing Jammed Paper

A. Turn the printer off and press the cover open button.

B. Remove any jammed paper, close cover.

C. If paper is caught in the cutter, and the printer cover will not open, you will need to slide the

cutter cover open.

D. Turn the cutter knob until you see a triangle in the window opening. This will return cutter to

normal position.

Open Cover

PMP Corporation • 25 Security Drive • PO Box 422 • Avon, CT 06001

Install Paper

Open Cutter Cover

Tear off Paper

Window

Cutter Knob

Page 4 of 5