Epson TM-T88IV ReStick Manuel - Sayfa 10

Etiket makinesi Epson TM-T88IV ReStick için çevrimiçi göz atın veya pdf Manuel indirin. Epson TM-T88IV ReStick 10 sayfaları. Receipt restick printer in windows using an ethernet connection
Ayrıca Epson TM-T88IV ReStick için: Broşür (2 sayfalar), Teknik Özellikler (2 sayfalar), Kullanıcı Kılavuzu (15 sayfalar), Kullanıcı Kılavuzu (9 sayfalar), Teknik Not (8 sayfalar), Kurulum İçin Adım Adım Kılavuz (14 sayfalar), Teknik Bülten (5 sayfalar), Kullanıcı Kılavuzu (20 sayfalar)

Sayfayı Yazdır
Epson TM-T88IV ReStick Manuel
The interface settings are not the same on both the printer and computer. Run the
show the current settings on the printer. Check the computer side to see that settings are the same.
Settings can be changed on the printer using the
The printer selected in the software is not correct or the software doesn't support the printer in use.
No longer prints
The TM printer is turned off. Turn on the TM printer. Confirm the connection of the power supply unit
or the voltage of the commercial power.
The TM printer is offline. Turn the TM printer online.
The ERROR LED of the TM printer is on or flashing. Remove the error cause.
The printing port of the driver on the computer side is not specified correctly. Confirm the driver
setting on the computer side.
The printer is not online in Windows. Check the status of the printer in the Windows Control Panel, the
printer should show status as ready. Tip: try stopping and restarting the Print Spooler from the
Services applet of the Control Panel.
Printing is slow
There are problems with the computer. Printing speed may go down due to problems with the network
system or applications. Run the printer self test to confirm the printer is capable of printing at its
normal speed.
DIP
switches.
printer self test
to