AEMC instruments L452 Hızlı Başlangıç Kılavuzu - Sayfa 10

Veri Kaydediciler AEMC instruments L452 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. AEMC instruments L452 17 sayfaları.

Channel Configuration

Channels can be configured either through the Data Logger Control Panel or the

instrument interface:

■ Consult the Data Logger Control Panel Help system for information about

configuration through the Control Panel.

■ Consult "L452 User Interface Screens" later in this Quick Start Guide for a table

with all available configuration screens through the user interface. For detailed

instructions about how to complete these screens, see the Model L452 User

Manual.

When configuring through the instrument's interface, each of the instrument's two

channels has its own set of configuration screens; the screens for one channel are

essentially identical to the screens for the other. These screens allow you to:

■ Enable and disable the channel. When disabled, measurements are neither

recorded nor displayed for the channel.

■ Select the type of input. This can be analog (voltage or current), pulse, or event.

Both channels must have the same input type.

■ Define measurement units to use when displaying measurement data.

■ Define scaling to establish the relationship between input and measurement units.

■ Enable and define alarm triggers to determine if the instrument will report an alarm

condition and the circumstances that will trigger an alarm condition.

Channels must be configured before you start a recording session.

Recording sessions can be configured and scheduled via the Data Logger Control

Panel, as explained in the Help. The instrument's user interface also includes a set of

screens for controlling and configuring a recording session. These screens enable you

to:

■ Specify the sample and storage periods to be used during the recording session.

■ Start a recording session immediately.

■ Schedule a recording for a future time.

■ Set a length of time for the recording to run.

■ Schedule start/stop dates and times for the recording.

■ Stop an in-progress recording.

■ Cancel a scheduled recording.

The Recording and Duration screen is the starting point for working with recordings.

This is the top-level screen for all recording-related activities. To see this screen,

display the "home" (Channel 1 & 2 Measurement Data) screen and press ►.

Consult the Model L452 User Manual for detailed information about configuring

recording sessions.