AEMC instruments Simple Logger II Series Hızlı Başlangıç Kılavuzu - Sayfa 6

Veri Kaydediciler AEMC instruments Simple Logger II Series için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. AEMC instruments Simple Logger II Series 8 sayfaları.

Sayfayı Yazdır

Configuring the Instrument

Before starting a recording on the instrument, various recording options should

be configured.

■ To do this, select Configure from the Instrument menu.

The Configure Instrument screen will appear and consist of multiple tabs

that contain groups of related options. Detailed information for each option is

available by pressing the Help button.

For example, the Recording tab sets the recording options. The instrument can be

configured to start recording at a date/time in the future or configured to record only

when Start Recording is selected from the instrument's control button. You can

also start a recording session immediately from the Control Panel.

■ To configure the instrument to start recording at some time in the future, select

the Schedule Recording checkbox, and specify the start/stop date and time.

■ To configure the instrument to start from the instrument's control button, ensure

that the Schedule Recording and Record now options are unchecked.

■ Click the Record now checkbox to start recording immediately from the

Control Panel.

NOTE: If you disconnect the instrument after configuring and running a

recording, the instrument will use the duration and storage rate defined

in the Control Panel for new recording sessions until you change the

settings in the Control Panel.

The Recording tab also contains a field that displays (1) total instrument

memory, (2) free available memory, and (3) the amount of memory required for

the recording session with its current configuration. Check this field to ensure

that you have sufficient memory to complete the configured recording.

The configuration settings will be written to the instrument. After the recording

begins, the instrument's LEDs will indicate that it is recording. The recording

status can be viewed in the Control Panel status window.

Downloading Recorded Data

After the recording stops, the data can be downloaded and viewed.

1. If the instrument is not connected, reconnect as previously instructed.

2. Highlight the instrument's name in the Simple Logger II Network branch, and

expand it to display the Recorded Sessions and Real-time Data branches.

3. Click the Recorded Sessions branch to download the recordings currently

stored in the instrument's memory. During the download, a status bar may be

displayed.

4. Double-click the session to open it.

5. The session will be listed in the My Open Sessions branch in the Navigation

frame. You can view the session, save it to an .icp (Control Panel) file, create

a DataView report, or export to a .docx file (Microsoft Word-compatible) or

.xlsx file (Microsoft Excel-compatible) spreadsheet.

To learn more about the options in the Simple Logger II Control Panel and DataView,

consult the Help system by pressing F1 or by selecting Help in the menu bar.