Epson 1640XL - Expression Graphic Arts Manuel - Sayfa 17

Yazılım Epson 1640XL - Expression Graphic Arts için çevrimiçi göz atın veya pdf Manuel indirin. Epson 1640XL - Expression Graphic Arts 23 sayfaları. Color image scanner
Ayrıca Epson 1640XL - Expression Graphic Arts için: Kullanıcı Kılavuzu (7 sayfalar), Kullanıcı Kılavuzu (22 sayfalar), Broşür ve Teknik Özellikler (24 sayfalar), Ürün Bilgileri (9 sayfalar), Buradan Başlayın Kılavuzu (8 sayfalar), Teknik Özellikler (2 sayfalar), Ürün Destek Bülteni (23 sayfalar), Manuel (11 sayfalar), Güncelleme (1 sayfalar), Ürün Destek Bülteni (40 sayfalar), Ürün Destek Bülteni (17 sayfalar), Ürün Destek Bülteni (3 sayfalar), Ürün Destek Bülteni (24 sayfalar), Ürün Destek Bülteni (29 sayfalar), Ürün Destek Bülteni (8 sayfalar), Ürün Destek Bülteni (3 sayfalar), Ürün Destek Bülteni (11 sayfalar), Ürün Destek Bülteni (14 sayfalar), Ürün Destek Bülteni (18 sayfalar), Ürün Destek Bülteni (12 sayfalar), Ürün Destek Bülteni (40 sayfalar), Ürün Destek Bülteni (11 sayfalar), Ürün Destek Bülteni (40 sayfalar), Ürün Destek Bülteni (22 sayfalar), Ürün Destek Bülteni (12 sayfalar), Ürün Destek Bülteni (21 sayfalar), Ürün Destek Bülteni (12 sayfalar)

Make sure the scanner, computer, and all other SCSI devices

are turned off and unplugged from the power source.

Caution:

Do not connect the scanner to the computer or other devices while they

are turned on as damage may occur.

Connect one end of the interface cable to one of the scanner SCSI connectors until

the locks on both sides snap in.

Note:

To connect the scanner to a PC or any other SCSI device, the total length

of cable in the daisy chain must not exceed 3 meters; otherwise the system

may not work properly.

Make sure no other interface is used.

Connect the other end of the cable to the SCSI port of your computer or another

SCSI device.

Note:

The SCSI port on the Macintosh is the larger port with the SCSI icon over it.

Plug in the power cords of your computer, scanner, and other external SCSI

devices.

Note:

Before turning on your system, be sure to read "Power-on sequence" following.

Power-on sequence

Keep the following in mind every time you turn on your computer and SCSI devices,

including the scanner.

Be sure to turn on the SCSI device which is connected at the farthest end of the

daisy chain first, then the second farthest and so on, until finally your computer.

If you attempt to use a SCSI device which has been turned on after the computer,

it may not work properly, or the computer may not work properly.

Connecting the Scanner to Your Computer