Epson 1815p - PowerLite XGA LCD Projector Kullanıcı Kılavuzu - Sayfa 10

Yazılım Epson 1815p - PowerLite XGA LCD Projector için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Epson 1815p - PowerLite XGA LCD Projector 27 sayfaları. Release of check tool for network projectors v1.00 for windows
Ayrıca Epson 1815p - PowerLite XGA LCD Projector için: Kullanıcı Kılavuzu (42 sayfalar), Kullanım Kılavuzu (36 sayfalar), Kullanım Kılavuzu (47 sayfalar), Hızlı Kurulum (2 sayfalar), Kullanıcı Kılavuzu (1 sayfalar), İşlev Kılavuzu (5 sayfalar), Yazılım Kılavuzu (2 sayfalar), Uygunluk Beyanı (4 sayfalar), Parça Listesi (1 sayfalar), Ürün Destek Bülteni (45 sayfalar), Ürün Destek Bülteni (25 sayfalar), Ürün Destek Bülteni (22 sayfalar), Ürün Destek Bülteni (28 sayfalar), Ürün Destek Bülteni (41 sayfalar), Ürün Destek Bülteni (34 sayfalar), Ürün Destek Bülteni (28 sayfalar), Ürün Destek Bülteni (15 sayfalar), Ürün Destek Bülteni (22 sayfalar)

Sayfayı Yazdır

Epson 1815p - PowerLite XGA LCD Projector Kullanıcı Kılavuzu

PowerLite 1810p/1815p

4. Select

and press

Yes

Enter

5. Press the

button to exit.

To disable the Operation Lock function, select

Operation Lock menu. Or press and hold the

the projector's control panel for 7 seconds. A message is

displayed and the lock is released.

Connecting to a Computer

You can connect the projector to any computer that has a

standard video output (monitor) port, including desktop

models, PC notebook computers, MacBook, PowerBook, and

iBook computers, and hand-held devices.

Connecting to the Computer Port

You can connect to the projector using the VGA computer

cable that came with it (the monitor port on your computer

must be a mini D-sub 15-pin port).

1. If you're using the VGA computer cable, connect one end to

the projector's

Computer1

other end to your computer's monitor port.

2. You may need to change the

setting in the projector's Signal menu to

Computer2 Input

RGB

3. You can connect an optional stereo mini-jack audio cable to

play sound through the projector, or connect a USB cable to

use the remote control as a mouse.

Note: The PowerLite 1815p can also be connected to a third PC

(but not to a Macintosh) through a USB connection. See the User's

Guide for details.

Caution: Don't try to force a connector to fit a port with a different

shape or number of pins. You may damage the port or connector.

PowerLite 1810p/1815p

to confirm the setting.

in the

Off

button on

Enter

port, and the

Computer 2

Computer1 Input

Presenting Through a Wireless

Network (PowerLite 1815p only)

Using EMP NS Connection, you can project images shown on

your computer screen—including text, graphics, and video—

directly to your audience without connecting the projector to

your computer. Before you begin, make sure you've installed

the wireless network module and the EMP NS Connection

software on your computer.

Starting EasyMP

Before you can connect to the projector wirelessly, you have to

switch it to EasyMP mode. Follow these steps:

1. Point the remote control at the projector and press the

button.

Power

2. Press the

EasyMP

EasyMP as the source.

You see this screen. The network settings appear in the lower

left.

3. If you've already set up your computer and projector for the

mode you want to use—Ad Hoc mode (also called

computer-to-computer mode) or Access Point mode (also

called infrastructure mode)—skip to "Projecting Over a

Network" on page 17.

Otherwise, continue with the next section.

Note: Use only the Epson 802.11a/b/g wireless module in the

projector. If you see a message asking you to insert a LAN or

memory card, check to make sure your 802.11 a/b/g module is

properly inserted.

Configuring the Connection

You can use NS Connection to connect to the projector and

send images wirelessly in two modes: Ad Hoc mode or Access

Point mode.

3/08

button on the remote control to select