Epson 2000P - Stylus Photo Color Inkjet Printer Kurulum Kılavuzu - Sayfa 15

Yazılım Epson 2000P - Stylus Photo Color Inkjet Printer için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Epson 2000P - Stylus Photo Color Inkjet Printer 17 sayfaları. Product support bulletin(s)
Ayrıca Epson 2000P - Stylus Photo Color Inkjet Printer için: Kartuşların Değiştirilmesi (2 sayfalar), Ürün Destek Bülteni (6 sayfalar), Ürün Destek Bülteni (1 sayfalar), Teknik Özellikler (1 sayfalar), Ürün Bilgileri (13 sayfalar), Kullanıcı Kılavuzu (12 sayfalar), Ürün Destek Bülteni (3 sayfalar), Ürün Destek Bülteni (2 sayfalar), Ürün Destek Bülteni (4 sayfalar), Ürün Destek Bülteni (7 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Kurulum Talimatları Kılavuzu (8 sayfalar)

Checking the print head nozzles

Make sure that the printer is turned off. Hold down the

button ( in the illustration below) and press the P power button ( in

the illustration below) to turn on the printer. Then release both buttons.

Here are sample printouts.

Print head is clean

Print head needs to be cleaned

If the nozzle check page does not print satisfactorily (for example, if any

segment of the printed lines is missing), then you should clean the print

head as explained below. If the printout is satisfactory, you are ready to

print your first page. See "Printing Your First Page" for instructions.

Follow the steps below to clean the print head.

1. Make sure that the P power light is on and that both the B black and

A color ink out lights are off.

2. Hold down the

The printer starts cleaning the print head and the P power light

begins flashing. Print head cleaning takes about sixty seconds to

complete.

cleaning button for three seconds.

load/eject

segments are missing