Epson 3170 - Perfection Photo Buradan başlayın - Sayfa 2

Yazılım Epson 3170 - Perfection Photo için çevrimiçi göz atın veya pdf Buradan başlayın indirin. Epson 3170 - Perfection Photo 4 sayfaları. Scanning tips and troubleshooting guide
Ayrıca Epson 3170 - Perfection Photo için: Ürün Destek Bülteni (34 sayfalar), Kullanıcı Kılavuzu (6 sayfalar), Ürün Destek Bülteni (23 sayfalar), Manuel (11 sayfalar), Ürün Destek Bülteni (40 sayfalar), Ürün Destek Bülteni (17 sayfalar), Ürün Destek Bülteni (24 sayfalar), Ürün Destek Bülteni (29 sayfalar), Ürün Destek Bülteni (8 sayfalar), Önemli Güvenlik Talimatları (4 sayfalar), Ürün Destek Bülteni (3 sayfalar), Ürün Destek Bülteni (14 sayfalar), Ürün Destek Bülteni (18 sayfalar), Ürün Destek Bülteni (12 sayfalar), Ürün Destek Bülteni (40 sayfalar), Ürün Destek Bülteni (40 sayfalar), Ürün Destek Bülteni (22 sayfalar), Ürün Destek Bülteni (12 sayfalar), Ürün Destek Bülteni (21 sayfalar), Sorun Giderme Kılavuzu (12 sayfalar)

Sayfayı Yazdır
Epson 3170 - Perfection Photo Buradan başlayın
3
Connect the cable for the built-in film adapter.
4
Connect the power cord and AC adapter, as shown.
Power cord
5
Connect the AC adapter to the scanner.
6
Plug the other end of the power cord into a grounded electrical outlet.
Caution: It is not possible to change the AC adapter's input or output
voltage. If the label on the AC adapter does not show the correct voltage,
contact your dealer. Do not plug in the power cord.
7
Use the USB cable that came with your scanner. Plug the square end of the
USB cable into the scanner's USB port. Then plug the flat end into any
available USB port on your computer or hub.
Note: Your scanner may not work correctly if you use a USB cable other than
the one supplied by EPSON or if you connect your scanner through more
than one hub.
8
Turn on the power switch on the side of the scanner.
The scanner turns on and the ] Start button flashes green. It stops flashing
and stays green when the scanner is ready.
9
For Macintosh, restart your system to fully activate the scanner and
software.
AC adapter

Scanner Basics

Your First Scan

The ] Start button on your scanner automatically opens the EPSON Smart
Panel, making it easy for you to scan your images for many different uses. Here's
how you can use the ] Start button and Smart Panel to scan photos and save
them as files.
1
Raise the scanner cover and place your
photo face down on the glass. Make
sure the top right corner of the photo
is aligned with the top right corner
of the scanner.
Then close the cover.
2
Press the ] Start button on your scanner.
Note: In Windows XP, you will see a message the first time you press the
] Start button. Select EPSON Smart Panel, click Always use this
program for this action, then click OK.
EPSON Smart Panel opens on your computer.
3
Click the
Scan and Save icon.
A progress meter appears on the screen and your photo is automatically
scanned. After your photo is scanned, the View Image screen opens.
4
Click Next to continue.
5
When you see the following screen, select a location and file type for your
scanned image, then click Save.
Specify the path to
the folder where you
want to save your
scanned image
Select a file format
Click Save
Turn over