Epson 3170 - Perfection Photo Ürün Destek Bülteni - Sayfa 38

Yazılım Epson 3170 - Perfection Photo için çevrimiçi göz atın veya pdf Ürün Destek Bülteni indirin. Epson 3170 - Perfection Photo 40 sayfaları. Scanning tips and troubleshooting guide
Ayrıca Epson 3170 - Perfection Photo için: Ürün Destek Bülteni (34 sayfalar), Kullanıcı Kılavuzu (6 sayfalar), Buradan başlayın (4 sayfalar), Ürün Destek Bülteni (23 sayfalar), Manuel (11 sayfalar), Ürün Destek Bülteni (17 sayfalar), Ürün Destek Bülteni (24 sayfalar), Ürün Destek Bülteni (29 sayfalar), Ürün Destek Bülteni (8 sayfalar), Önemli Güvenlik Talimatları (4 sayfalar), Ürün Destek Bülteni (3 sayfalar), Ürün Destek Bülteni (14 sayfalar), Ürün Destek Bülteni (18 sayfalar), Ürün Destek Bülteni (12 sayfalar), Ürün Destek Bülteni (40 sayfalar), Ürün Destek Bülteni (40 sayfalar), Ürün Destek Bülteni (22 sayfalar), Ürün Destek Bülteni (12 sayfalar), Ürün Destek Bülteni (21 sayfalar), Sorun Giderme Kılavuzu (12 sayfalar)

Installation Instructions:

Use these steps to install Copy Utility.

1. Close Smart Panel if it is running.

2. From the Start button click Run and then Browse.

3. Search for the folder that contains the downloaded Copy Utility file (By default this

folder is called EPSON, unless you have manually specified the download folder

location).

4. Double-click this file to extract the Setup files.

5. Double-click SETUP.EXE. The installation will start and the following screen will launch.

6. Click Next. The Confirm File Deletion dialog box appears. This is required before the

new version of the Copy Utility is installed.

7. Click OK to start uninstalling the files. You'll see a Setup Status progress screen while

the files are being removed.

8. When completed, the Maintenance Complete screen appears next. Click Finish.

9. If you have Smart Panel 1.01A or 1.02A installed on your computer system then you will

need to rerun the SETUP.EXE to complete the installation and copy the updated Copy

Utility files to your hard drive. Follow steps 1 through 5 to complete this process, and

then go to step 10 to continue with the installation.

If you have Smart Panel 1.03A or 2.00A then the next screen will pop up automatically.

10.

Page 2 of 4