Epson 7800p - PowerLite XGA LCD Projector Ürün Bilgi Kılavuzu - Sayfa 15

Yazılım Epson 7800p - PowerLite XGA LCD Projector için çevrimiçi göz atın veya pdf Ürün Bilgi Kılavuzu indirin. Epson 7800p - PowerLite XGA LCD Projector 22 sayfaları. Release of emp ns connection for windows & mac upgrade from v2.50 to v2.51
Ayrıca Epson 7800p - PowerLite XGA LCD Projector için: Kullanıcı Kılavuzu (42 sayfalar), Kullanım Kılavuzu (36 sayfalar), Hızlı Kurulum (2 sayfalar), Yedek Parçalar (1 sayfalar), Kullanım Kılavuzu (47 sayfalar), Kurulum Kılavuzu (5 sayfalar), Şartname Sayfası (2 sayfalar), Teknik Özet (7 sayfalar), Ürün Destek Bülteni (25 sayfalar), Ürün Destek Bülteni (22 sayfalar), Ürün Destek Bülteni (28 sayfalar), Ürün Destek Bülteni (41 sayfalar), Ürün Destek Bülteni (15 sayfalar), Ürün Destek Bülteni (22 sayfalar)

Sayfayı Yazdır

Epson 7800p - PowerLite XGA LCD Projector Ürün Bilgi Kılavuzu

EPSON PowerLite 7800p Projector

When you finish changing an address in the network menu,

press the

button (on the remote control) or the

Enter

button (on the projector). This stores the

Auto/Enter

value.

6. When you're done making all necessary changes, press

to exit the menu system.

Opening and Closing EMP Monitor

To start EMP Monitor, click

Programs > EPSON Projector > EMP Monitor

If you've added the program to the Startup programs folder, it

may already be open. If so, click the icon in the system tray on

the lower-right corner of your screen to display the EMP

Monitor window:

To close EMP Monitor, right-click the program icon shown

above, then select

Exit

Registering Projectors in EMP Monitor

Before you can monitor a projector, you have to register it.

Follow these steps:

1. Open EMP Monitor. You see this screen:

Click here

2. Click

EPSON PowerLite 7800p Projector

Start > Programs

All

Click here to start EMP Monitor

. You see this screen:

Click here

3. Click

Auto detect

on the network. Or click

the projector's name and network address.

Note: If Auto detect fails to find the projector, your projector

ESC

may not be connected or configured correctly for the network.

Any projectors found on the network are listed:

4. Select each projector you want to add by clicking its name

and clicking

You see this screen listing all registered projectors:

Note: To delete a projector from the list, highlight the

projector name, and click

5. Click

projectors on the main EMP Monitor screen:

5/03

to locate projectors currently operating

Manual registration

. When you're done, click

Add

Delete

. You see the status of each of your registered

and enter

Click here