Philips 1445RS/05 Kullanıcı Kılavuzu - Sayfa 4

TV Philips 1445RS/05 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Philips 1445RS/05 17 sayfaları. Color televisio

Which buttons to press

on the remote control

What the screen will sho

When N and Q are pressed together, the

installation menu will appear on the screen.

The symbols are just underneath the buttons.

Press the menu + button and 'manual store' will

appear on the screen.

Press the menu + button again and 'searching' will

appear. A bar on the screen will move to show the

progress of tuning. When the television finds a

signal, 'searching' will go off the screen, and the

programme number will flash.

If the picture quality is poor, there may be a better

signal on another frequency, so start searching

again by pressing the menu + button again.

The best signals are usually in a group, one after

the other.

When your television has found a good signal,

decide which programme number you want it on,

for example programme 1 for BBC1. Make sure

you can recognise the test picture from any other

pieces of equipment if you have them connected.

While the programme number is flashing, press the

P+ or P- button to change the number. You can't

use zero.

When you press N and Q together again, 'stored'

will appear on the screen and the television will

store the television channel on the programme

number you have chosen.

Repeat steps 3 to 6 to store each programme.

Press the menu button twice to leave the manual

store display.

STORED

MANUAL STORE