Epson EasyMP Multi PC Projection Kullanım Kılavuzu - Sayfa 34

Yazılım Epson EasyMP Multi PC Projection için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Epson EasyMP Multi PC Projection 49 sayfaları. Epson easymp multi pc projection operation guide
Ayrıca Epson EasyMP Multi PC Projection için: Kullanım Kılavuzu (47 sayfalar), Kullanım Kılavuzu (48 sayfalar), Kullanım Kılavuzu (46 sayfalar)

Sayfayı Yazdır

Epson EasyMP Multi PC Projection Kullanım Kılavuzu

Solving Problems

Cannot connect to the projector you want to use

Cannot connect the projector and the computer via wireless LAN

Check

Is the Wireless LAN unit connected?

Is the projector connection mode set to Quick connection

mode?

For wireless LAN connections, is the wireless LAN setting

enabled when the computer is in power save mode?

Are there any obstacles between the wireless LAN

connection access point and the computer or projector?

Is the computer's wireless LAN radio strength set to low?

Does the Wireless LAN conform to 802.11a, 802.11b, or

802.11g?

Is Wireless LAN Power set to Off in the projector's

Wireless LAN menu?

Is the SSID setting different?

Is the same WEP key set?

Check that the Wireless LAN unit is securely connected.

EasyMP Multi PC Projection cannot connect using Quick connection mode. Set the connection mode

to Advanced connection mode. See your projector User's Guide for details.

Enable the Wireless LAN.

Sometimes the indoor environment prevents the projector from being found in a search. Check for

any obstacles between the access point and the computer or projector, and change their position to

improve communication.

Set the radio strength to maximum.

It is only compatible with standards 802.11a, 802.11b, and 802.11g, and not with other standards such

as 802.11.

Set Wireless LAN Power to On in the projector's Wireless LAN menu from the Configuration menu.

See your projector User's Guide for details on the projector's wireless LAN settings.

Set the computer, the access point, and the projector to the same SSID.

When selecting WEP from Security, set the access point, the computer, and the projector to the same

WEP key.

Remedy