Epson EMP Monitor V4.10 Kullanım Kılavuzu - Sayfa 20

Yazılım Epson EMP Monitor V4.10 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Epson EMP Monitor V4.10 34 sayfaları. Epson emp monitor operation guide

Sayfayı Yazdır

Monitoring window layout

Error information: Shows the warning or problem status using the

following icons.

Lamp life warning

High-temperature

warning

Replace Air Filter

No Air Filter

Low Air Flow

Air Flow Sensor Err.

Open lamp cover

door error (lamp

error)

*1 When "Temperature level display group view" is set to "On" at

"Environment setup" in the "Tool" menu, an icon indicating the internal

temperature of the projector will be displayed on top of the projector

icon. The default setting is "Off".

*2 Check the following items.

• Check that the projector's power is turned on.

• Check that the LAN cable is connected.

• Check that "Network Monitoring" is set to "ON" or "Standby Mode"

is set to "Network ON" in the projector's configuration menu.

*3 Check that the projector has been correctly connected to the network.

*4 You can display the lamp life warning at any time preset at

"Environment setup" in the "Tool" menu.

TIP

The projector information that is generated when a problem is

detected is stored until EMP Monitor is closed. The EMP Monitor

displays will not be updated automatically even if the projector status

returns to normal. Click [Refresh] in the main window to update the

status.

Lamp out

Lamp failure at

power on

High internal

temperature error

Internal (system)

error

Fan error

Sensor error

Other error

Selecting display items

You can select only the required items to be displayed in "Detail list view".

PROCEDURE

Select "Option" from the "View" menu.

The "Option" window will be displayed.

Select the check box of the item you want to display.

Click [OK].