Epson EMP-8100 Kullanım Kılavuzu - Sayfa 6

Yazılım Epson EMP-8100 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Epson EMP-8100 14 sayfaları. Esc/vp level 6 serial communication manual
Ayrıca Epson EMP-8100 için: Teknik Özellikler (1 sayfalar), İletişim Kılavuzu (20 sayfalar)

Sayfayı Yazdır

Registering projectors for monitoring

Registration using automatic detection

PROCEDURE

Click [Auto detect] in the [Register projector]

dialogue box.

Select the projector(s) to be registered, and then click

[Add].

You can select several projectors at the same time.

If a projector does not appear in the list, use "Registration using

IP address (Manual registration)".

p.6

TIP

• Projectors that have been registered using automatic detection will be

re-detected on the basis of projector name and the IP addresses for

these projectors will be displayed each time EMP Monitor is started.

• If a password entry screen is displayed, enter the password for the

projector's Administrator and then click [OK].

If more than one projector was selected, the password entry screens

for each projector will be displayed in succession.

Click [Close] to return to the main EMP Monitor

window.

Refer to "Main EMP Monitor window" for details on using the

main window.

p.8