When both CH P and CH S remain off for about thirty minutes, the printer
enters standby mode and this message appears.
[E] STARTUP ERROR
If this message appears when you turn on the printer, the power may have
been turned off while the printer was performing a save or reset operation.
EPL-7000 cont.
[W] TONER LOW
The printer is almost out of toner.
LCD display, you can print up to 25 more pages.
[E] TONER OUT
The imaging cartridge must be replaced.
[E] TRAY SET AUTO XXX
The paper size setting does not match the paper loaded in the specified
paper cassette.
currently selected cassette.
[E] TRAY SET
OPT
The paper size setting does not match the paper loaded in the optional lower
paper cassette.
[E] TRAY SET
STD
The paper size setting does not match the paper loaded in the standard paper
cassette.
The right column is the expected paper size.
[S] WAIT
Printer is being reset after a START UP ERROR.
[S] WARMING UP
Printer is warming up.
------------------------------------------------------------------------------
EPL-7500
[E] COVER OPEN
Cover is open or the imaging cartridge is not installed.
[E] MANUAL FEED
Manual feed method is selected.
[S] OFF LINE
Printer is Off Line
[E] OUT OF PAPER
No paper cassette is installed, the paper cassette is empty, or the paper
set lever is in the manual position.
EPL-7500 cont.
[E] PAPER ENTRY JAM
Paper is not feeding from the specified paper cassette or has jammed on its
way into the printer.
[E] PAPER EXIT JAM
Paper is jammed inside the paper path.
[S] PRINTING
The printer has received data and is printing.
[S] PRINTING TEST
The printer is printing the test page.
The right column is the expected paper size and the
XXX
The right column is the expected paper size.
XXX
When this message first appears on the
Sayfayı Yazdır