Epson FX-1180 - Impact Printer Hızlı Kılavuz - Sayfa 2

Yazılım Epson FX-1180 - Impact Printer için çevrimiçi göz atın veya pdf Hızlı Kılavuz indirin. Epson FX-1180 - Impact Printer 33 sayfaları. Epson serial impact dot matrix printers
Ayrıca Epson FX-1180 - Impact Printer için: Kurulum Kılavuzu (33 sayfalar), Broşür ve Teknik Özellikler (24 sayfalar), Ürün Bilgileri (17 sayfalar), Hızlı Referans Kılavuzu (16 sayfalar), Manuel (11 sayfalar), Şartname (2 sayfalar), Manuel (18 sayfalar), Teknik Özellikler (2 sayfalar), Sınırlı Garanti (1 sayfalar), Referans Kılavuzu (34 sayfalar)

Sayfayı Yazdır
Epson FX-1180 - Impact Printer Hızlı Kılavuz
5
6
7
8
Downloaded from:
http://www.usersmanualguide.com/
LF/FF button
❏ Feeds paper line by line when
pressing shortly.
❏ Ejects a single sheet or advances
continuous paper to the next
top-of-form position when held
down.
Micro adjust
When you hold down the Pause
button for three seconds, the printer
enters the micro adjust mode. In this
mode, you can press the LF/FF D and
Load/Eject U buttons to adjust the
top of form or tear off position. See
"Micro Adjust Function."
Load/Eject button
❏ Loads a single sheet of paper.
❏ Ejects a single sheet of paper if a
sheet is loaded.
❏ Loads continuous paper from
the standby position.
❏ Feeds continuous paper
backward to the standby
position if a sheet is loaded.
Pause light
❏ On when the printer is paused.
❏ Flashes when the printer is in the
Micro Adjust mode.
EPSON FX-880+/FX-1180+ Quick Guide
Pause button
9
❏ Stops printing temporarily, and
resumes printing when pressed
again.
❏ When held down for three
seconds, enters the Micro Adjust
mode. When pressed again, exits
the Micro Adjust mode.
Lock
10
When the lock-out mode is on, the
Paper Out and Pause lights flash if
a locked button is pressed.
11
Paper Out light
❏ On when no paper is loaded in
the selected paper source or
paper is not loaded correctly.
❏ Flashes when paper has not been
fully ejected or a paper jam has
occurred.
Buttons and Lights (2/2)