Epson FX-2190 Kullanıcı Kılavuzu - Sayfa 18

Yazılım Epson FX-2190 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Epson FX-2190 48 sayfaları. Impact printers
Ayrıca Epson FX-2190 için: Teknik Özellikler (2 sayfalar), Manuel (11 sayfalar), Kurulum Kılavuzu (2 sayfalar), Ürün Bilgi Kılavuzu (19 sayfalar), Teknik Özellikler (2 sayfalar), Hızlı Referans (12 sayfalar), Buradan başlayın (2 sayfalar)

Adjusting the Paper-Thickness Setting

Before you start printing, make sure the paper-thickness setting is correct

for the type of paper you are using.

Turn the printer off and

open the printer cover.

The paper-thickness lever

is located on the left side of

the printer. The numbers

next to the lever indicate

the thickness setting.

Select the correct setting according to this table:

Paper type

Ordinary paper

Thin paper

Carbonless multipart forms with:

2 parts (original + 1 copy)

3 parts (original + 2 copies)

4 parts (original + 3 copies)

5 parts (original + 4 copies)

6 parts (original + 5 copies)

7 parts (original + 6 copies)

Continuous paper with labels

Postcards

Envelopes

Available when using the tractor in the bottom or front pull position.

Note:

❏

When the temperature is 41°F (5°C) or lower, or 95°F (35°C) or higher, set

the paper-thickness lever one position lower to improve print quality.

❏

When the temperature is 41°F (5°C) or lower, or 95°F (35°C) or higher,

multipart forms with 7 parts cannot be used.

Paper Handling

Lever position

0 or 1 (single sheets)

0 (continuous paper)

5 or 6