ARID-Dry MS-600 Kurulum ve Kullanım Kılavuzu - Sayfa 7

Nem Alıcı ARID-Dry MS-600 için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Kılavuzu indirin. ARID-Dry MS-600 14 sayfaları. Desiccant dehumidifier

The controls in this machine are UL listed and provide for automatic operation and all required

protection of the machine components. Access to the control panel is via a hinged access cover.

Air flow is accomplished using internal motorized impellers for process and reactivation air. The

process fan will operate any time the "ON-OFF" switch is in the "ON" position.

A fractional hp gear motor drives the desiccant rotor.

Self-regulating PTC heater elements provide the "heat source" for reactivation.

MAINTENANCE

This machine is designed for minimal maintenance and years of trouble free service.

Clean the exterior of the machine with a damp cloth and mild soap if necessary.

DO NOT use a garden hose or pressure washer to clean this machine !

Occasionally inspect internal components for loose fasteners or damage from handling.

Inspect the flanged power inlet, connector, and cord for damage.

Check to ensure all access panels are in place and secure.

Air Inlet Filters (2 ea. 10x10x2" pleated)

Filter access is accomplished by removing the inlet collar plates for the process (10" collar, top)

and reactivation filter (10" collar, bottom).

Inspect filters regularly and replace if dirty. Regular air filter maintenance is critical to extending

the life of the desiccant rotor and moisture removal efficiency.

Keeping filters clean is the most important long term maintenance on this machine !

- 3 -