Epson PCMCIA Software Kullanıcı Kılavuzu - Sayfa 28
Yazılım Epson PCMCIA Software için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Epson PCMCIA Software 47 sayfaları. User manual - pcmcia card
Sayfayı Yazdır
Using the CARDINFO Command
The CARDINFO command provides these functions:
Identifies the types of PC cards inserted in the PCMCIA
slots
Identifies I/O ports, IRQs, and memory areas used by
PC cards so that you can ensure that two components do
not use the same resources
Turns power to the PCMCIA slots on or off
Displays manufacturer and product information about
PC cards
Identifies the drive letter for an ATA hard disk or ATA
flash card
Displays the most recent error for an inserted card.
You can run CARDINFO from the MS-DOS command line.
Unless you add the directory containing CardLite to the path
command in your AUTOEXEC.BAT file, you need to change to
your CardLite directory to run the CARDINFO command.
When you type CARDINFO without any switches at the
MS-DOS command line, the program creates a CARDID.INI
file and displays the following information for any cards
installed in the PCMCIA slots:
C a r d t y p e
M a n u f a c t u r e r
Product name.
This program also identifies empty slots.
2-8
Using CardLite