ECI CabLite ECO 4000K Kurulum Kılavuzu - Sayfa 7
Işık Fikstürü ECI CabLite ECO 4000K için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. ECI CabLite ECO 4000K 14 sayfaları.
Sayfayı Yazdır•
Installation Manual
6.3 CabLite ECO with Dimming Option
•
1 to 12 downlights
•
Dimmer board (factory wired and mounted in gang box)
•
24VDC power supply (factory wired and mounted in gang box)
•
One 8' cable for connecting first downlight (factory wired and located in gang box)
•
One 4' cable for each additional downlight
•
Gang box and cover
•
Installation Manual
This option allows for setting a desired brightness level for the cab by adjusting potentiometer located on
the Dimming board. There is also a connection on the board for an optional remote potentiometer
(customer provided) so brightness levels can be manually adjusted without having to access the car top.
The AC voltage input of the power supply (Brown = LINE, Blue = NEU) is left free for the customer to
decide how to connect. Figure 8 - CabLite ECO with Dimming Wiring shows wire nuts.
The 24VDC power supply output is prewired at the factory to the Dimmer Board. The Dimmer board has
a 12" cable prewired to the LIGHTING Output of the Dimmer board. It has a two pin connector for easy
connection to the 8' cable of the first downlight.
6.3.1 Dimmer Board
The Dimmer Board (Figure 2 - Dimmer Board) allows for adjusting light level using the BROGHTNESS
potentiometer located on the board. The board comes factory prewired for easy installation.
6.3.1.1
Dimmer Board Connections
•
Pin 1 is +24VDC output from supply (RED wire)
•
Pin 2 is -24VDC output from supply (BLACK wire)
•
Pin 3 is "+" LED output
•
Pin 4 is "-" LED output
•
Pins 5 & 6 are for an optional external potentiometer (Customer provided) for setting brightness
level in place of using on board potentiometer.
Cablite ECO Installation Manual Rev 4.0
Electronic Controls, Inc.
7073 North Atlantic Ave. Cape Canaveral, FL 32920
800-633-9788
www.eciamerica.com
P a g e
| 7