Ariel AM Series Kullanıcı Kılavuzu - Sayfa 5

Küvetler Ariel AM Series için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Ariel AM Series 10 sayfaları.

C-Series Whirlpool User Manual with Bluetooth

Turn on/off the Display:

This system remains on "standby" when power is supplied to the whirlpool system.

If the system is in "standby" mode, the 'Power Standby' on/off icon will be partially visible on the dark screen. On standby, if any

portion of the screen is touched the backlight will display at 50% strength. To activate the system, on the display, press and hold the

'Power Standby' button for 3-seconds. When the unit is first activated the current temperature (°C) will display on the screen. The

temperature sensor is located below the overflow drain knob.

There is a 2-hour timer programmed into this system, all functions will automatically turn off and the system will go into "standby"

mode, 2-hours from system activation.

To turn off all functions of the system, placing the unit in standby, press the 'Power Standby' button on the display.

Water Jet Feature:

The water pump and features directly related to the whirlpool system only work when the water level inside the tub is above the

water-level sensor. The water-level sensor is hidden behind the tub wall. This system has two sensors; the other sensor is the

temperature sensor. The temperature sensor is visible from inside the tub, usually underneath the overflow drain knob (depending on

model).

Press the 'Water Jet' button to activate the water pump and aslo unlock the other [optional] whirlpool features. If the water level

inside the tub is not above the water-level sensor, the 'Water Jet' icon will flash and the other [optional] whirlpool features will remain

locked. If the water jet feature is turned on but the water is not yet at a safe level, the whirlpool feature will automatically turn on when

the water reaches an appropriate level. The default operating time for the water jets is set for 20-minutes. If the water jet feature and

air bubble feature are both activated, but at different times, both features will still automatically turn off at 20-minutes. To stop the

'Water Jet' feature, press the 'Water Jet' icon for 2-seconds. You will see "OFF" flash on the display.

Underwater Color Light:

The underwater tub light has color and intensity adjustments. Press the 'Color Changing Lights' button to turn on the underwater lights.

The light color is white, first (C=1); to change the intensity of the light, press the 'Color Changing Lights' button again to the next

brightness setting; press again to the next brightness setting; press again to turn off; there are 3 color brightness settings and an

"OFF" setting; a cycle of 4-positions in total.

To change the color of the light, while the light function is on, press the 'Parameter Setting' button, and then press the 'Parameter UP'

or 'DOWN' buttons; the light function will cycle through 7 settings: "C=1" to "C=7".

Brightness Underwater Light:

Another way to adjust the tub light intensity, while the light function is on, press the 'Light Brightness' button, and then press the

'Parameter UP' or 'DOWN' buttons: "B=1" to "B=3".

C = Color

Color: 1 ~ 7

B = Brightness

Brightness: 1 ~ 3

Page 5 / 9