Toshiba 13J2KCVRG-T Kurulum Kılavuzu - Sayfa 13

Klima Toshiba 13J2KCVRG-T için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Toshiba 13J2KCVRG-T 32 sayfaları.

Sayfayı Yazdır

Model

Power source

Maximum running current

Circuit breaker rating

Power supply cable

Connecting cable

Wiring Connection

Indoor unit

Wiring of the connecting cable can be carried out without removing the

front panel.

1. Remove the air inlet grille.

Open the air inlet grille upward and pull it toward you.

2. Remove the terminal cover and cord clamp.

3. Insert the connecting cable (according to the local cords) into the pipe hole

on the wall.

4. Take out the connecting cable through the cable slot on the rear panel so

that it protrudes about 20 cm from the front.

5. Insert the connecting cable fully into the terminal block and secure it tightly

with screws.

6. Tightening torque : 1.2 N·m (0.12 kgf·m)

7. Secure the connecting cable with the cord clamp.

8. Fix the terminal cover, rear plate bushing and air inlet grille on the indoor

unit.

Air inlet grille

Screw

How to install the air inlet grille on the indoor

unit

• When attaching the air inlet grille, the contrary of the removed operation is

performed.

ELECTRICAL WORKS

RAS-10J2KCVRG-T

50Hz, 220V Single phase

5.30A

7.0A

H07RN-F or 60245 IEC66 (1.5 mm

Front panel

Screws

Cord clamp

Terminal cover

RAS-13J2KCVRG-T

6.85A

9.0A

or more)

Outdoor unit

1. Remove the valve cover, the electric parts cover and the cord clamp from

the outdoor unit.

2. Connect the connecting cable to the terminal as identified by the

matching numbers on the terminal block of indoor and outdoor unit.

3. Insert the power cord and the connecting cable carefully into the terminal

block and secure it tightly with screws.

4. Use vinyl tape, etc. to insulate the cords which are not going to be used.

Locate them so that they do not touch any electrical or metal parts.

5. Secure the power cord and the connecting cable with the cord clamp.

6. Attach the electric parts cover and the valve cover on the outdoor unit.

Terminals block

Valve cover