EPSON PhotoPC 850Z
When the memory card is full, the number on the status
display panel reads
, the status light on the back of the
0
camera flashes orange, and you can no longer use the shutter
button. Before you can take any more pictures, you need to
delete some of the images on the memory card.
You may also see one of the following on the display panel:
In quick shot mode, the number of photos
taken and temporarily saved in the camera
is displayed in brackets.
In Program or Manual mode, the exposure
value appears on the left and the shutter
speed appears on the right when you hold
the shutter button down halfway.
When you turn the camera's dial to
is displayed.
Set
When you make an audio recording,
appears in this space.
When you take photos using the interval
shooting feature,
appears in the display
Int
panel.
Using the Flash
Press the flash button to cycle through the five flash settings.
Your camera also comes with a hot shoe to attach an optional
external flash. See your User's Guide for more information on
where to buy and how to attach an external flash.
NOTE
The camera dial must be turned to
An icon for each setting appears on the status display panel, as
shown below:
Auto
The flash goes off automatically whenever it's needed
for adequate lighting (default setting).
Forced Flash
The flash goes off with every picture you take. Use this
setting to compensate for backlighting; for example,
when you are facing a light source.
Flash Off
The flash is disabled, even when lighting is inadequate.
Use this setting for special effects, where flash
photography is prohibited, or for macro mode close-ups.
EPSON PhotoPC 850Z
8 -
,
rEc
,
, or
.
Red-eye Reduction
Use this setting to eliminate the red-eye effect (the
reddish reflection of the flash off of your subjects
pupils) that flash photography often results in.
Slow Synchronized Flash
To light up the background as well as your subject, use
the leading slow synchronized flash mode when taking
pictures at night. Or, use the trailing slow synchronized
flash mode setting for capturing motion. This option causes
the aperture to stay open longer, allowing more light to enter
the camera. See your User's Guide to change this flash setting
to leading or trailing.
Note
Slow synchronized flash is available only in the Program or Manual
user modes. See page 9 to change the user mode.
After you take a flash picture, the icon blinks until the flash is
fully recharged. Your flash setting remains in effect even after
you turn off the camera.
Setting Image Quality
EPSON PhotoPC 850Z has four image quality (resolution)
settings. Press the image quality button on top of the camera
to cycle from one setting to the other.
image quality
button
The image quality icons appear on the status display panel as
shown below.
Standard
Produces color or black and white images at 640
pixels. The CompactFlash card holds approximately
120 pictures without audio recordings, but the image size
is smaller and includes less detail when enlarged. This
setting is good for pictures that are viewed on screen or on
the Web.
8/99
480
Sayfayı Yazdır