Epson PowerLite 1760W Kullanım Kılavuzu - Sayfa 18

Yazılım Epson PowerLite 1760W için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Epson PowerLite 1760W 47 sayfaları. Epson powerlite
Ayrıca Epson PowerLite 1760W için: Başlangıç Kılavuzu (9 sayfalar), Hızlı Kurulum Kılavuzu (4 sayfalar), Kullanım Kılavuzu (20 sayfalar), Kullanıcı Kılavuzu (25 sayfalar), Kullanım Kılavuzu (50 sayfalar), Uygunluk Beyanı (4 sayfalar), Bakım Kılavuzu (2 sayfalar), Broşür ve Teknik Özellikler (4 sayfalar), Kurulum El Kitabı (4 sayfalar)

Sayfayı Yazdır
Epson PowerLite 1760W Kullanım Kılavuzu
Registering and deleting projectors for monitoring
A Parent group can be set for other parent groups, so that a hierarchical
group arrangement can be created.
First, create the registration groups, and then register projectors into the
groups that have been created.
Procedure
A
Right-click in Grouping view and select "New" - "Group".
The following window will be displayed.
Make the necessary settings while referring to the table below.
If Detail list view is displayed, select New - Group from the Edit
menu.
Group name
Enter the name of the group to be displayed in
Grouping view or Detail list view.
Up to a maximum of 32 bytes can be entered. A
space cannot be used as the first character.
Display icon
Select the icon to be displayed in Grouping view
or Detail list view.
Parent group
This selects the parent group. If no groups have
been created, this cannot be selected.
Monitor
Select this to monitor all projectors that have
been registered in the group. If this is not
selected, the settings made when the individual
projectors were registered will be used.
It cannot be set when creating a new group.
q
You can also carry out this operation by selecting New - Group from the
Edit menu.
B
When the setup is complete, click "Register" to start the
registration. When the message is displayed, click "OK".
The icon(s) of the projector(s) you registered will be displayed in
Grouping view or Detail list view.
C
Right-click the projector icon to register to the group you
have created in Grouping view or Detail list view, and select
"Edit".
q
You can also carry out this operation by selecting Edit in the Edit menu.
D
In the Edit projector window, select the group name to use
for registering in Parent group and then click "Change".
The status of the group registration will be displayed as an icon in
Grouping view or Detail list view.
q
The registration details can also be checked using Projector list in the View
menu.
18