Epson PowerLite 1770W Hızlı Kurulum Kılavuzu - Sayfa 2

Yazılım Epson PowerLite 1770W için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. Epson PowerLite 1770W 4 sayfaları. Powerlite 1770w
Ayrıca Epson PowerLite 1770W için: Başlangıç Kılavuzu (9 sayfalar), Kullanım Kılavuzu (47 sayfalar), Kullanım Kılavuzu (20 sayfalar), Kullanıcı Kılavuzu (25 sayfalar), Kullanım Kılavuzu (50 sayfalar), Uygunluk Beyanı (4 sayfalar), Bakım Kılavuzu (2 sayfalar), Broşür ve Teknik Özellikler (4 sayfalar), Kurulum El Kitabı (4 sayfalar)

Sayfayı Yazdır
Epson PowerLite 1770W Hızlı Kurulum Kılavuzu

Adjust the image

1
If you don't see an image, press the Source Search button on the
projector or the remote control to select the image source.
Note: If you still see a blank screen or have other display problems, see
the troubleshooting tips on the back of this sheet.
2
To raise the image, press the foot release button and lift the front of the
projector. Release the button to lock the foot in position.
3
PowerLite 1775W: Press the Focus buttons to sharpen the image.
PowerLite 1760W/1770W: Rotate the focus ring to sharpen the image.
PowerLite 
1775W
PowerLite 
1760W/1770W
4
Turn the zoom ring to reduce or enlarge the image.
PowerLite 
1775W
PowerLite 
1760W/1770  W
5
If your image looks like
or
one side of the screen at an angle. Place it directly in front of the center
of the screen, facing the screen squarely.
6
If your image looks like
or
projector to correct it.
, you've placed the projector off to
, press the
or
buttons on the

Using the remote control

Make sure the batteries are installed as shown (two AA batteries).
Turn projector
on and off
Turn off projector
display and sound
Access projector menus
For more information on using the remote control, see the User's Guide on
your projector CD.
Project wirelessly
Follow the steps here to connect the projector wirelessly over an 802.11g,
802.11b, or 802.11n wireless network. Your computer must have a wireless
card or built-in wireless interface, and be running Windows 7, Windows
Vista
, Windows XP Professional x64, Windows XP, or Windows 2000, or
®
Mac OS
®
X 10.3 to 10.6.
1
Turn off the projector and unplug the power cord.
2
To install the LAN module, turn the projector over and remove the screw
securing the LAN module cover.
3
Remove the wireless LAN module cover.
Choose which
source to display
Control projector volume
Navigate
projector menus