Epson PowerLite 1830 Kullanıcı Kılavuzu - Sayfa 8

Yazılım Epson PowerLite 1830 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Epson PowerLite 1830 42 sayfaları. Esc/vp21 command business projectors
Ayrıca Epson PowerLite 1830 için: Kullanım Kılavuzu (47 sayfalar), Hızlı Kurulum (4 sayfalar), Kullanıcı Kılavuzu (1 sayfalar), Güncelleme Talimatları (4 sayfalar), Uygunluk Beyanı (4 sayfalar), Parça Listesi (1 sayfalar), Kullanıcı Kılavuzu (25 sayfalar), Güncelleme Kılavuzu (8 sayfalar), Şartname (4 sayfalar), Kullanıcı Kılavuzu (25 sayfalar)

Operating environment

Limitations imposed by a Windows Vista

environment.

When using EMP Monitor under Windows Vista, note the following

limitations.

• You must have administrator authority in order to use Register at

startup on the Environment setup screen of EMP Monitor.

• Even after EMP Monitor has been uninstalled, the settings and log

information will remain on the hard disk. If this information is no

longer required, you may delete the EMP Monitor V4.30 folder.

Provided the default settings were used at installation, this folder can be

found at:

"C:\Users\(User Name)\AppData\Local\VirtualStore\Program

Files\EPSON Projector\EMP Monitor V4.30"

Check the following points before starting up EMP Monitor.

• EMP Monitor must be installed on the computer to be used for

monitoring and control.

• The computer and the projectors must be connected to the network.

• If using Windows 2000/Windows NT4.0/Windows XP/Windows

Vista, the computer must be started up in Administrator mode.

• Depending on the projector model, a commercially-available serial

TCP/IP conversion adapter and a connection cable are required in

order to use EMP Monitor. s Projector User's Guide "

Make the settings for the serial TCP/IP conversion adapter before

connecting to the projector.