Dimplex BOF4068 Kullanıcı El Kitabı - Sayfa 7

Kapalı Şömine Dimplex BOF4068 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Dimplex BOF4068 19 sayfaları.
Ayrıca Dimplex BOF4068 için: Servis Kılavuzu (12 sayfalar)

Sayfayı Yazdır

1. Replacement Parts

Installation

Figure 1

BOF4056

17.8in (451mm) 27.6in. (701mm) 10.0in. (255mm) 16.3in (413mm) 15.6in. (395mm)

BOF4068

17.8in (451mm) 32.4in. (823mm) 10.0in. (255mm) 16.3in (413mm) 20.4in. (517mm)

BOF6056

23.9in. (607mm) 27.6in. (701mm) 10.0in. (255mm) 22.4in (569mm) 15.6in. (395mm)

NOTE: If installation in a cus-

tom mantel is desired, a power

cord accessory is available (BOF-

PLUGKIT) to plug the unit directly

into a wall outlet.

2. Allow up to 4 ft. (121.9 cm)

of service cable for connect-

ing a power supply wire to the

cable clamp on fireplace when

installing before finishing wall.

CAUTION: Use two conduc-

tor, non-metallic sheath cable

with ground wire (3 wires total)

for the incoming power supply on

fireplace inserts. Use appropriate

wire to meet local and national

electrical codes for rated power.

NOTE: It is recommended that

all drywall installation and finish-

ing be completed after unit is fully

installed.

3. On the back of the unit remove

the cable clamp, by removing

the screw at the top (Figure 2).

4. Install a 3/8 in. (10 mm) or

1/2 in. (13 mm) cable connec-

tor, not included, suitable for

mounting in a 7/8 in. (22 mm)

hole, to the cable plate and