Epson PowerLite 1880 Hızlı Kurulum - Sayfa 3

Yazılım Epson PowerLite 1880 için çevrimiçi göz atın veya pdf Hızlı Kurulum indirin. Epson PowerLite 1880 4 sayfaları. Operation guide - easymp monitor
Ayrıca Epson PowerLite 1880 için: Kullanım Kılavuzu (47 sayfalar), Teknik Özellikler (6 sayfalar)

Sayfayı Yazdır

Select the Projector Name setting and enter a name (up to 16

characters long) to identify your projector over the network.

Use the displayed keyboard to enter characters. Press the arrow buttons

on the remote control to highlight the characters and press Enter to

select them.

Note: See the online User's Guide for information on adding passwords.

Select the Wired LAN menu and press Enter.

Choose IP Settings and press Enter.

If your network assigns addresses automatically, select IP Settings and

turn on the DHCP setting. If not, turn off the DHCP setting and enter

the projector's IP Address, Subnet Mask, and Gateway Address,

as needed.

To prevent the IP address from appearing on the network standby

screen, set the IP Address Display setting to Off.

When you are finished, select Complete and press Enter, then press

Enter again to save your settings.

Press the Menu button to exit the menu system.

See "Install network software" for additional instructions.

Install network software

Install the EasyMP

Network Projection software on each computer that will

project over the network. Use the CD labeled Epson Projector Software to

install the program.

For instructions on installing and using your network software, click the icon

on your desktop to access the online EasyMP Network Projection Operation

Guide (requires an Internet connection). If you don't see the EasyMP Network

Projection Guide icon, you can install it from the projector CD or go to the

Epson website, as described on the right.

To monitor and control your projector over the network, download and install

the EasyMP Monitor software and manual from the Epson support web site.

You can install a link to the downloads page from the projector CD or go to

the Epson website, as described on the right.

Troubleshooting

If you see a blank screen or the No signal message after turning on your

computer or video device, check the following:

•

Make sure the power light on the projector is green and not flashing, and

the A/V Mute slide is open.

•

Press the Source Search button on the projector or the remote control to

switch to the correct image source, if necessary.

•

If you're using a Windows laptop, press the function key on your

keyboard that lets you display on an external monitor. It may be labeled

CRT/LCD or have an icon such as

Fn key while pressing it (such as Fn + F7). Wait a moment for the display

to appear.

•

If you're using a Mac

laptop, open System Preferences and select

Displays. Select the VGA Display or Color LCD option if necessary, then

click the Arrange or Arrangement tab, and select the Mirror Displays

check box.

Where to get help

Manuals

For more information about using the projector, click the icons on your desktop

to access the online manuals (requires an Internet connection). If you don't

have icons to the manuals, you can install them from the projector CD or go to

the Epson website, as described below.

Telephone Support Services

To use the Epson PrivateLine

Support service, call (800) 637-7661 and enter the

PIN on the Epson PrivateLine Support card included with your projector. This

service is available 6

to 6

, Pacific Time, Monday through Friday, for the

duration of your warranty period. You may also speak with a projector support

specialist by dialing:

US: (562) 276-4394, 6

to 8

to 4

, Pacific Time, Saturday

Canada: (905) 709-3839, 6

to 8

Days and hours of support are subject to change without notice. Toll or long

distance charges may apply.

Internet Support

Visit www.epson.com/support (U.S.) or www.epson.ca/support

(Canada) for solutions to common problems. You can download utilities and

documentation, get FAQs and troubleshooting advice, or e-mail Epson.

Registration

offers. You can use the CD included with your projector or register online at

www.epson.com/webreg.

Optional accessories

For a list of optional accessories, see the online User's Guide.

You can purchase screens or other accessories from an Epson authorized reseller.

To find the nearest reseller, call 800-GO-EPSON (800-463-7766).

Or you can purchase online at www.epsonstore.com (U.S. sales)

or www.epson.ca (Canadian sales).

. You may have to hold down the

, Pacific Time, Monday through Friday, and 7

, Pacific Time, Monday through Friday