Epson PowerLite 7850pNL Kullanım Kılavuzu - Sayfa 13

Yazılım Epson PowerLite 7850pNL için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Epson PowerLite 7850pNL 36 sayfaları. Release of emp ns connection for windows & mac upgrade from v2.50 to v2.51
Ayrıca Epson PowerLite 7850pNL için: Kullanıcı Kılavuzu (42 sayfalar), Kullanıcı Kılavuzu (12 sayfalar), Yedek Parçalar (1 sayfalar), Kullanım Kılavuzu (47 sayfalar), Hızlı Kurulum (2 sayfalar), Broşür ve Teknik Özellikler (2 sayfalar), Ürün Bilgi Kılavuzu (25 sayfalar), Ürün Destek Bülteni (25 sayfalar), Ürün Destek Bülteni (38 sayfalar)

Sayfayı Yazdır

Epson PowerLite 7850pNL Kullanım Kılavuzu

Registering and deleting projectors for monitoring

Registration by specifying an IP address (Manual

registration)

PROCEDURE

Right-click in "Grouping view" and select "New" -

"Projector (manual registration)".

The following window will be displayed.

• If "Detail list view" is displayed, select "New" - "Projector (manual

registration)" from the "Edit" menu.

TIP

You can also carry out this operation by selecting "Projector (manual

registration)" from "New" in the "Edit" menu.

Enter the IP address of the projector to be registered

in the "IP address" box and then click [Search]. When

the message is displayed, click [OK].

• If using a serial ⇔ TCP/IP conversion adapter and cable to connect

the projector, select "Use Serial ⇔ TCP/IP conversion adaptor".

Enter the port number in "Port Number" and then click [Search].

After searching is complete, enter the information for

the projector to be registered while referring to the

table below.

Display name Enter the name of the projector(s) to be displayed in

"Grouping view" or "Detail list view".

Up to a maximum of 32 bytes can be entered.

A space cannot be used as the first character.

Display icon

Select the icon(s) to be displayed in "Grouping view"

or "Detail list view".

Parent group

Select when registering a projector in a group.

If no groups have been created, this cannot be

selected. s"Registering several projectors to a

monitoring group all at once"

Projector

This shows the name that has been registered on the

name

projector.

IP address

This shows the IP address that you entered in step 2.

Use Serial ⇔

Select this if using a serial ⇔ TCP/IP conversion

TCP/IP

adapter to connect the projector.

conversion

adaptor.

If using a serial ⇔ TCP/IP conversion adapter to

Port Number

connect the projector, enter the port number.

p.13