Epson PowerLite 84 Hızlı Kurulum

Yazılım Epson PowerLite 84 için çevrimiçi göz atın veya pdf Hızlı Kurulum indirin. Epson PowerLite 84 4 sayfaları. Lamp and status information
Ayrıca Epson PowerLite 84 için: Kullanıcı Kılavuzu (42 sayfalar), Teknik Özellikler (6 sayfalar), Kullanım Kılavuzu (47 sayfalar), Teknik Özellikler (2 sayfalar), Hızlı Kurulum Kılavuzu (9 sayfalar), Kullanıcı Kılavuzu (1 sayfalar), Ürün Destek Bülteni (25 sayfalar), Parça Listesi (1 sayfalar), Ürün Destek Bülteni (22 sayfalar), Parça Listesi (1 sayfalar), Ürün Destek Bülteni (28 sayfalar), Ürün Destek Bülteni (41 sayfalar), Uygunluk Beyanı (4 sayfalar), Ürün Destek Bülteni (15 sayfalar), Kurulum El Kitabı (3 sayfalar)

Sayfayı Yazdır

PowerLite

84+/824+

Quick Setup

Before using the projector, make sure you read the safety instructions in the

User's Guide on your projector CD.

Your projector may vary slightly from the one shown in this Quick Setup sheet,

but the procedures are the same.

Connect the projector

Choose from the following connections:

Computer Monitor Port

Connect a computer using the VGA cable that came with the projector.

Connect one end to the projector's Computer1 or Computer2 port, and the

other end to your computer's

monitor port. If you are using a notebook,

switch it to external display. You can also connect an audio cable to the

Audio1 or Audio2 port.

Computer USB Port

Connect a computer (Windows

2000 SP4 or later or Mac OS

using the USB cable that came with the projector.

Connect the square end of the USB cable to the projector's

(square) USB port. Connect the flat end of the cable to any USB port on your

computer. Then turn on your projector (see "Turn on your equipment"). You

can also connect an audio cable to the Audio2 port.

Follow the on-screen instructions to install the Epson USB Display software

(with Mac OS X, first double-click the USB Display Installer icon that appears

on your computer screen). Then press the USB button on the remote control.

(You need to install the software only the first time you connect.)

Video Player

Connect up to 4 video devices and use the remote control to switch between

them.

Microphone

Connect a dynamic or condenser microphone to the Mic port, using a 3.5 mm

mini-jack cable.

NOTE: If you're using a condenser microphone, set the Plug-in Power setting

to On. See the User's Guide on your projector CD for more information.

X 10.5.1-10.6)

TypeB

For information on playing sound through the projector or connecting an

external monitor, see the User's Guide on your projector CD.

Turn on your equipment

Turn on your computer or video source.

Plug in the projector.

Open the A/V Mute slide all the way.

Component-to-

S-Video

RCA video cable

VGA cable

cable

(composite video)

(optional)

Audio cable

(optional)